ScreamWorx *Unleashed!*

[JCat]

Welcome to ScreamWorx v 1.0
http://www.trackworx.com/Screamworx_BANNER.jpg
________________________________________

Warning: Frightning Download Size Ahead..
Screamworx is a LARGE set, covering a number of different styles. Fans of traditional haunted houses, or gore hounds should hopefully find something to their liking. Of course, many of the objects can be used for other ideas outside of the realm of darkness (though I wouldn't recommend sticking a chainsaw smack in the middle of a scenic outdoor cafe). The castle brick set includes basic building blocks, but is not meant to be an "all out" wall set, as my focus was to get a little bit of everything, otherwise this would be called Castleworx. I figured I’d mention that before someone asks “if only you included a draw bridge, and matching dormers”.

Download the self-extracting installer (exe), or the manual (zip) file.
Once again, this is a large set. If an item gives you an error, you may want to reinstall it, as the installer may choke during extraction. Each and every item was tested rigorously, and the finished product was installed countless times without and problem.

SceamWorx was tested with the US version of RCT3 w/Soaked and Wild installed. I cannot tell you how it will work if one or both expansion packs are not present.

Download The EXE Automatic Extracter
http://www.trackworx.com/JCat's ScreamWorx.exe

Or

Download the manual Zip Only File
http://www.trackworx.com/JCat's ScreamWorx.zip



Valuable Tips and Other Things You Should Know:

http://www.trackworx.com/ringskull.jpgApparitions have one side, and are designed with the standard wall attributes. Move your Apparition in and out to determine which side the surface will show. These haunts are transparent, and work best with nearby lights. You can change the density of the transparency by simply stamping the same apparition over itself a number of times. PLEASE NOTE, Apparitions and Spider Webs may sometimes make walls and other scenery behind it transparent as well (giving a forever transparent result). This is a random placement issue. Just tinker around with your positioning (like placing them down in different order) of transparent props, as well as objects/walls behind, and for some reason, it will eventually work. This is one of those mysteries like the modder's Glass problem, though at least this works most of the time.

http://www.trackworx.com/ringskull.jpgWhen designing around the Chandelier, keep other "night light" objects at a safe distance. Any close lights, candles, torches..etc.. near the chandelier may cause it to strobe. If you want one of the seperate included candles to be brighter, you can place another candle right on top of the original.

http://www.trackworx.com/ringskull.jpgBlack Lights are great for lighting halls, apparitions or any other object you may want to eerily emphasize. It may be best not to exceed more then four bulbs in one area, or you will get pulsing, however, exceeding the bulb count can turn out an interesting result: Adding five or six bulbs will give an effect like a few of the bulbs are starting to lose their juice, much like real fluorescent bulbs behave. No one said a house of horrors is supposed to be glamorous. Also, black lights tend to illuminate objects which face the ends of the bulb (perpendicular), and not parallel to them.

http://www.trackworx.com/ringskull.jpgSome wall overlays or wall mounted items need to hug the wall to look aesthetically pleasing. If you notice an overlay is not meeting up with your wall, move your wall in or out to make them align (or do the same with the actual object).

http://www.trackworx.com/ringskull.jpgThe 2D scare props are obviously best used at night, or within the pitch black walls from ye old Dark Ride Set. A nearby light creates a dramatic effect, however, the headlights of whatever vehicle you're riding in will be quite effective to immediatly spark a non-lit nearby object. Try placing a flickering torch near the Night Terror and watch its eyes pulse.

http://www.trackworx.com/ringskull.jpgThe Demon Arch was not designed as an outside fixture to match the old brick walls which dominate the wall set (you'll notice the brick design is different). This is basically a prop meant for entering new rooms/areas.

http://www.trackworx.com/ringskull.jpgThe included Particle Effects do not have solid attributes like a marker of some sort, as I didn't want anything visible that would hinder the look, particularly if you wish to stack your particles. Unfortunately, there's no way that I'm aware of to create a dispenser like object similar to Frontier's emitters which disappear once you close the scenery window. Fortunately, the particles that were drafted for this set do not cover huge areas (like Frontier's Mist) and are fairly easy to delete like any wall. Timed particles like The Deadly Explosion go off in short intervals (like once every second); if you wish to have a continuous effect, just watch the timing of each instance, and stamp down new particles in between the gaps of nothingness.
________________________________________
I wish to thank everyone who showed enthusiasm with their kind comments - this set goes out to you!

[BGTB2005]

Ooh......

You do mean First look, right?

[JCat]

Thanks - yes, perhaps subconsciously I was thinking of something I hated as I was typing the title - :haha: ... fixed "fist" to "first"

[Cyberleader]

OOOOoooOOOO!!!! I like the candles!

[lewij007]

Looking very nice. Keep up the good work :up:

[Spinout]

Yes, this looks very good. I know I will use it.

[shaun allsop]

wow looking good, new lights are allways a good thing to have, And that arched wall peaice looks nice.

shaun

[RCT-Spanky]

Wow, that looks real creepy :confused: - I lke the new wall set very much. Too bad, that the white parts of the peeps clothing do not glow in the black light. I'm curious for the next step ...

BTW: The walls could match with MaxInfinitys Gothic Set. I like the idea to combine both sets, if you have yours ready next time.

[LightWarriorK]

Oooohhh, that's good stuff.:up:

It'll round out the existing Dark Ride Scenery quite nicely, methinks. I love those arches.

Wow, with Marnetmar's Egypt theme for the Spirit Temple, and this for the Shadow Temple, I'm really glad I took a break from my park for a bit. This will all help SO much.

I'm looking forward to seeing the rest of it!:D

[Plokoon111]

Yes another expansion to my darkrides! I love this Pumper!

[hotroddude]

AWSOME! i forgot to stay up last night :( but these pics look great! cant wait till u finish

[computertech82]

Wow. I like to have some of those objects for one of my parks. Would you happen to have furniture like stuff as well? And how about a transparent spider web wall?

[Plokoon111]

yeah you must have furnature Pumper ;)

[marnetmar]

That's a great start Pumper, I can't wait to see what else you come up with for this set :up: :up:

[mikeyca]

YES...stone archways!!! Not only is that useful for walls but also for bridges! :D Also, I love the distressed tiled floors...loving it!

[MDEKing]

Wow! Can't wait to use these! :D

[Greenfreak10]

sweet! :D

[Dattu]

Ooohh... Creepy!

[infiniteblue]

I like this pack! Can't wait to see more. I really liked those blacklights, too.

[ytivarg]

Very promising.... I'm excited to see what other fun things you'll include in this.

[JCat]

Thanks for the comments; A spiderweb is currently in the modeler now - just working out the transparency; it was one of the first objects created, but I haven't gone back to it yet. Additional items are furniture, staircases (for tracks to ride up/down), other light effects, blood splatters, additional walls, roof pieces, and lot of more horror props are in the works. Oh, those arches are actually come in triplets - one large higher/longer wall.

I wanted to thank Iceatics and Coastersimfan (<-I hope I got his name right), for helping me a few weeks ago with the effects matrix, along with DRP's guide, and Jonwil's reference (thanks to Sebar for hosting that info).

[Fisherman]

Perfect! I can't wait to see more!!! Those stairs for tracks sound really really nice! Thanks for all your hard work Pumper!

-Derek

[East_Aer82]

OMG!!! You don't understand how perfect this is. Its exactly what I was hoping for and need to complete my park. Elizabeth Bathory thanks you for building the inside of her castle (and maybe the castle itself?!?)!

Pure genius Pumper...

DROOL!!!!!!

[grod4L]

FURNITURE!?

*CHOKES*

Amazing Pumper, this will be so useful in my haunted manor, I'm drooling! Could there possibly be a *ahem* chandelier *cough* in there somewhere? Hehe.

I love the candles. So much.

[Plokoon111]

I LOVE YOUUUUU!!!!!

[TheCoasterNut]

Every time I think I've seen it all, someone creates another amazing scenery set. Looks Great!

[Small Print]

This looks almost Unreal Tournamentish for some reason, especially that bottom left picture.

[Fisherman]

cough...transparent ghosts...cough...ahem...

-Derek

[JCat]

cough...transparent ghosts...cough...ahem...

-Derek

Stop spoiling it! :haha: ;)

Already have those on the drawing boards.

[East_Aer82]

Chandeliers, especially a rather large one. Maybe for a grand hall. Wall sconces (sp?) would be hot (no pun intended). And possibly pointed archways.

... I'm so excited ... I almost peed a little ...

Pumper, you are my hero!!!

edit - Oh look... you just got a 5 star rating ;) ;)

[Pate]

Another work from Pumper...the whole project sounds extremely fantastic. I can't wait for the release!!!

[sebar]

Pumper, everytime you come out with something new, you astound me with your great work. I look forward to using this in the future. And thanks for your hard work on this.

[computertech82]

Looking forward for this set. I was holding off my project for just a set like this to show up. The cobweb wall would be an awesome addition.

http://img92.imageshack.us/img92/4747/cobweb7mc.jpg (http://imageshack.us)

[grod4L]

Stop spoiling it! :haha: ;)

Already have those on the drawing boards.

WHA WHA WHAT!!??

Holy...I don't...how...what...

Pumper. You are my hero.

[JCat]

Thanks again all
computertech82 - that is a cool looking web wall. The web I have will somewhat similar, but a completely transparent object (single plane alpha).

Same goes for the transparent ghosts (not full rounded 3D). They'll be great in the darkness, and won't be a polygon burden in the least.

[ytivarg]

Will they be genuinely creepy ghostly-figures... or, something out of Scooby-Doo?

I opt for the first one. :D

[Greenfreak10]

the scenery reminds me of hawloween :bulb:

[JCat]

Will they be genuinely creepy ghostly-figures... or, something out of Scooby-Doo?

I opt for the first one. :D

Was thinking more on the lines of Casper.. nah, not really :haha: . Based on the skeleton pirate in that coffin, you can get an idea of the direction this will be heading. We already have enough "cutesy" horror stuff with the stock RCT3 spooky theme...now we go the other direction.

Tis a shame though that we can't animate...

[ytivarg]

Misty figures like this would be great...
http://img95.imageshack.us/img95/6314/ghost95vd.jpg (http://imageshack.us)

And, just an idea... run with it if you so desire... what about windows with ghostly shadows behind them? That'd look great from the midways. ;)

[computertech82]

Thanks again all
computertech82 - that is a cool looking web wall. The web I have will somewhat similar, but a completely transparent object (single plane alpha).

Same goes for the transparent ghosts (not full rounded 3D). They'll be great in the darkness, and won't be a polygon burden in the least.

Great. Hope you can get it to work! And the pic is from an old game for transparent web. The shade of black (at least in the old game) was the transparency color. How long you think it will take ya? (of course, no pressure ;) )

[East_Aer82]

Some Gothic vampyric crosses would be very nice as well.

[Jag100]

this pack looks great pumper

[RCT-Spanky]

Misty figures like this would be great...

I think, if Pumper works on transparent ghosts you can add the mist from the game and have nearly a same effect.

[Vodhin]

Looking really really great, Pumper! This is a fantastic surprise! As for transparent ghosts: have you thought about diagonal planes? (And I'm wondering if one of you great firework makers out there might have already tried using the APE to create a misty phantom?) I can't wait to see more of this set!

[StayingDead]

Once again you come out with a brilliant set. Can't wait.

[Plokoon111]

Misty figures like this would be great...

God that picture gave me nightmares, I hate ghosts, but Pumper can you add something like this. . .

Hey Pumper it would be cool if you made this stuff!

A crooked chamber if possible.

http://img451.imageshack.us/img451/3412/crookedchamber5rm.jpg

The saw mill!

http://img345.imageshack.us/img345/281/sawmill0mj.jpg

And a torture chamber! Muhahahaha!

http://img451.imageshack.us/img451/4365/troturechamber8qf.jpg

IT would be cool, and don't forget about old 1800's furnature ;)

[Greenfreak10]

Misty figures like this would be great...
http://img95.imageshack.us/img95/6314/ghost95vd.jpg (http://imageshack.us)


thats just a body appration, not a mist. its just the ghost of a victorain lady, i forgot the name of it.:( anyways, where did you get that pic??

[camandjack]

I love those candles! I can't wait for this!

[ytivarg]

thats just a body appration, not a mist. its just the ghost of a victorain lady, i forgot the name of it.:( anyways, where did you get that pic??

If you want to get all technical on the form.. whatev... I was simply using it as an example of what I was talking about :rolleyes:

imagesearch on google.

[Pate]

Can you post any update?? Sorry, but we need something!!:hitting-self:

[ytivarg]

God that picture gave me nightmares, I hate ghosts, but Pumper can you add something like this. . .

Hey Pumper it would be cool if you made this stuff!

A crooked chamber if possible.

http://img451.imageshack.us/img451/3412/crookedchamber5rm.jpg


Dude... how many times are you gonna beg for that crooked chamber deal? We've seen that picture from you a dozen times already.

[Plokoon111]

wow please don't be rude. Id just think it be good, im not forceing him to do it, i'm sayen it be a good deal jesus lol.

To pumper: So when are you planninmg to release this?

[marnetmar]

Can you post any update?? Sorry, but we need something!!:hitting-self:


To pumper: So when are you planninmg to release this?


Give the guy a break will you? He just posted about this yesterday & stated he's just getting started with it. You'll get it when it's finished, which might be awhile.

[live_the_thrill]

Give the guy a break will you? He just posted about this yesterday & stated he's just getting started with it. You'll get it when it finished, which might be awhile.

I see so many pleads for a release for most things here, especially the videos..

Anyway, I am already digging this park. Nice to see an update for one of the first scenery parks released, and ever since then we haven’t got any real dark ride material to work with.

[Coasterfreak000]

Misty figures like this would be great...
http://img95.imageshack.us/img95/6314/ghost95vd.jpg (http://imageshack.us)


And, just an idea... run with it if you so desire... what about windows with ghostly shadows behind them? That'd look great from the midways. ;)


I agree. You should make it so you can make a lift hill and the slope of the stairs the same of the track so it looks like you are going up the stairs in Coastercam

[JCat]

I agree. You should make it so you can make a lift hill and the slope of the stairs the same of the track so it looks like you are going up the stairs in Coastercam

I guess I should be listening to myself then, hehe - that was my idea to begin with.
You may have missed the part where I said "Additional items are furniture, staircases (for tracks to ride up/down), other light effects, blood splatters, additional walls, roof pieces, and lot of more horror props are in the works" ;)

As of a few hours ago, the stairs are complete.

[Zen Coaster]

Brilliant ideas.

If you need any betatesters, I'd love to be one.

[jonwil]

This I like, especially if you can get ghosts and such in there.
You should make some floor pieces (wooden floor etc) including pieces that, when placed on top of the curved track pieces such as large curve, small curve and s-bend (e.g. on the wooden mouse or haunted mansion ride) will form a curved hole for the track.
So basicly you put in the square wooden base blocks to make the main floor then you could have edge blocks that go at the edges of the straight track plus these corner blocks so essentially it makes a channel with the track moving through it (so that the cars only just miss scraping the edge of the wood)

[hiimmisterdude]

YAYAYAYAYAYAYAYAYAYAYAYAYAYAYAYAYAYAYAYAYAYAYAY 2nd horror pack

[Zen Coaster]

How about a Michael Jackson statue as he looked in Thriller? ;)

[Pate]

Better, a statue of michael jackson himself!! :haha:

[JCat]

No Michael this time around - we want to keep it spooky, but not disturbing where people want refunds.

EDIT And in other matters: Brick Staircase and webbing is done, and a few apparitions are floating about.



Jonwil - can you give me some sort of example on those curved floor boards you mentioned?

[East_Aer82]

I think what Jonwil is talking about are short walls, prolly about 1/3 height, that have the same curvature(sp?) as the track pieces. So that you could place them right next to the track creating a channel for the track to go through, kinda like a log flume (for lack of better example)

[computertech82]

I was hoping, would you be creating Gothic type windows? Like a Main street scenery piece that can be placed on any type of wall?
And I was wondering, could you make "Flying Buttress" supports? (simple low poly types of both types; broken down to several pieces for different heights).
I can't get the pieces in the game now to create a decent one. Canal Park is the closest I could get one.

http://img109.imageshack.us/img109/6483/gothicwindow8zk.jpg (http://imageshack.us)

http://img309.imageshack.us/img309/8004/buttress8ih.jpg (http://imageshack.us)

http://img109.imageshack.us/img109/671/buttress31zd.jpg (http://imageshack.us)

http://img309.imageshack.us/img309/9333/buttress24pv.jpg (http://imageshack.us)

[hotroddude]

Better, a statue of michael jackson himself!! :haha:


that would definatally scare everyone

[CoasterSim.Fan]

Looks good so far keep it up. This will defiantly make our dark rides scarier.

[KiDFoX]

Looks like some useful stuff here. I have a few dark rides that can always use new scenery and it looks like there are some non dark ride possiblities here.

Your scenery is always very sold on my system also which is great! Wish we knew why some custom scenery is trouble free and some isn't for a lot of folks.

[Magnum]

Pumper... I think YOU are kind of scary...

I mean, what you come up with looks unnaturally...cool...:up:

[Eagle001]

Pumper, I sware man that you are improving every day. Keep up the great work; but hurry up :D . We can't wait to use this. Joking of course, I know it takes time to make. :up: Looks really cool so far. :cool:

[JCat]

As always, thanks for the comments -

I'll get some more pics up shortly, possibly late tonight. It's going to be a while before release, as it's a large-ass set, with a lot of experimentation during the process.

[LightWarriorK]

Take your time, man.:)

The experimentation ensures quality and usefulness, and you're legendary for both.:up:

[Deru]

Halo Pumper
the is a good job.
I can hope that I it soon Downloading.

MFG
Deru

[camandjack]

Can't wait for the new pics!!

[Kee101]

anything new pumper?

[JCat]

04-07 Progress
Here's a small update. Oh & thanks computertech82 for that photo.

A trio of ghostly-apparitions
http://www.trackworx.com/scream5.jpg http://www.trackworx.com/scream6.jpg http://www.trackworx.com/scream7.jpg
Various Spider Webs, and a Staircase leading to the unknown.
http://www.trackworx.com/scream4.jpg

[Coastermaster]

Amazing !!!

[Startours_3000]

:eek: :eek: :up: they look sooooooooooooooooooo kool!!!!!, cant wait to use these.
I dont suppose u've got The Haunted Mansion ghosts going in ur pack??;) ;)

[Kee101]

thats sick!!!!!!!!!!!!!! nice work pumper

[RCT-Spanky]

Very nice photos from the Kelly Family :). (for those who don't know what the Kelly Family is ... a group from ireland , famous for their folk-inspired music here in Europe and always good for jokes about their clothes :p)

I like the stairs very much and those ghost are also awesome. Did you us Alpha Textures for the spiderwebs? I don't know, why nobody else use them?

[Deru]

Hello Pumper
the sees yes actual out good. such a thing can may good use.
am one time tensed what you make else all.

MFG
Deru

[lewtheo]

i love this, what else you adding to it?will come in helpfull

[StayingDead]

Wow those spiderwebs look fantastic! Can't wait until the next update. Oh and good job with the candles. Wondering if your going to add a banister for the staircase.

[The_Cook]

computertech82: would you be creating Gothic type windows? "Flying Buttress" supports?

Not wishing to hijack Pumpers thread, but I'm working on various eclesiatical fittings. Hopefully flying Buttresses, a crucifix, gargoyles, Klinn's Framework sized Gothic Arches and other bits of ribbing, vaulting. It'll probably be the end of the month before I'm in a position to annonce properly. This isn't intended to compete with Screamworx since I'm approaching it more from an eclesiatical architecture point of view rather than ghost train scenery.

[JCat]

Thanks all - still a long way to go; no there won't be banisters on the stairs. Many old stone castles didn't have them actually, but more importantly, it's better this way, as I don't have to make a left and right version of the same thing, and much space is needed for other things.

The apparitions are flat props -- what's interesting is, the more you paste down the same ghost over itself, the less transparent and more detailed it becomes, so you can stamp down to your liking. Sometimes, the scenery behind them creates a transparency as well, which is weird, but if you experiment with their placement and surrounding scenery, you'll get different results, many of which may accidentally turn out very cool.

Yup, webs are alphas - otherwise you'd be talking polygon ignorance to the max.


The_Cook Not sure why you're asking Computertech82 a question about this, as that could have been easily PM'ed to him, personally. However, if you take a moment to read his posts in this thread, you'll notice those Gothic postings were pics he recommended on seeing as scenery. Not sure if he's going to eventually take them on himself, but the best way to find out is to private message him. :nuts:

My set is mainly horror/haunted related, and the majority of the scenery will be concentrated on the "internals" of a dark ride; I'm not shooting for much on external architecture - but a basic old brick set will be present as seen from the pics. There are many fine building sets out there right now to make a haunted house or dungeon right now, so I'm mainly pushing out the goods you'd see "inside".

[Cyberleader]

I can't wait!

[marnetmar]

Great stuff there Pumper :up: :up: I especially like those ghosts. This will be another excellent addition for everyone to use in their dark rides.

[Plokoon111]

Very nice Pumper ur amazing!

[Sorcy]

Wow, this looks really cool, and can we have a vid of that strair-show coaster?:p

[lee2by4]

If i say that figure on a "haunted" ride and it was actually haunted i would **** my self and scream my head off! This is a great set, i cant wait til it comes out. :up:

[Spinout]

Wow, I love those apparitions.

[Pate]

Wow! That's scary!!!!!

[Small Print]

That looks awesome. Those apparitions are very cool.

[MDEKing]

Wow, Pumper, you're really workin' these days! Keep it up!

[Eletigna]

I had not discovered until now that your you were doing this one fantastic pack which I like much his thematic one, Pumper :)

If you need aid in putting lights or effects to the objects you count with me ;) I had thought to return to again do packs mainly with objects that have light or effects because I see that there is shortage of light elements, but I do not know :confused:

Perhaps I am to you making small small gifts to adorn our parks with lights and effects that always must have so that they are more spectacular.

I will follow with attention your progress and I wait for anxious its release.

I´m sorry for not more often to answer the scenery creators but I find difficult to translate to the English. :(

[gforcejunkie]

HOORAH!

[ytivarg]

Ha! I love the one at the top of the stairs... I totally didn't even notice it at first! Fantastic!

[Fisherman]

THAT'S IT!!!! That's exactly what I wanted!!!! OOOOOOOOOOOOO!!! GIMME GIMME GIMME!!!

-Drooooooooooooooool

[rct3x]

Looking sexy :) This should be one hell of a pack :up:

[Zen Coaster]

Always well impressed by your efforts, Pumper ... looking forward to this pack.

[CoasterSim.Fan]

You have some really nice items in here, I defiantly see some nice horror house rides coming out of this set. Just try not to make it to scary we don’t want to scare the peeps to death. Do the peps in the game even tell the deference between one sentry piece and another?

[rctmaniac]

yet another fantastic set from pumper!! wooooow woooow my favourite bit is the stair case-its great! i dont want to pressure you or anything but do you have any idea on a release?

[ryguy222]

lookin good pumper. keep up the good work

[East_Aer82]

Fan-Freakin-Tastic!!!! *drool*

[grod4L]

WOWEEEE!!!!

We have another breakthrough in custom scenery!!!

I can't tell you how eagerly I am awaiting this pack...it looks like these pieces can add so much to a darkride!

And one question, would you ever consider making victorian style ghosts (like haunted mansion)? Just a thought! I know this is a huge project and I don't want to pressure you at all.

Again great job Pumper!

[Zen Coaster]

Pumper, what about objects that are classed as speakers but don't look like one? That way we could have that functionality without making them obvious.

[niccum_123]

I LOVE THIS

Maybe make some Pictures with the people coming out of them, Or a mirror that would actually reflect the stuff behind them but with a person in the middle of it

[Witward]

im sure youve thought of this before but if you havnt here is an incredible idea, ok in your mouse works(wich is awesome by the way) you had a clear wall with big stars, well here is an incridble idea, why not mak a floor tile a wall tile and a ceiling tile with stars on it, now not the big stars, like little dotts and mabey you could make three sets with different sized stars, now that would be cool mixed in with blue light from DRPs lights, it would give the dark rides a huge outerspace feel, waht do you think?
P.S one last thing, do you think you would ever make concreate bases for the supports, thanks.:up:

[YthySlz]

Amazing just a great new set for some people the possibilty's will be endless now well done :D :)

[Greenfreak10]

DAMN THATS ***** GREAT!!!! :eek::D

maybe some orbs??? i seem to know everything about the paranormal stuff.:rolleyes:
and nice job on the ghosts, but can you feature some famous ghosts?? like the ghost of the victorian lady??? and maybe some zombies??? :noob:

[niccum_123]

Make the Ring girl or the Grudge girl:D

[drsheep]

Any chance of you releasing a video of the ride too? Like you did with the original dark ride set? It looks really neat!!!

[Kee101]

any new shots pumper

[JCat]

Kee101 - Saturday night perhaps..
drsheep - that's a possibility this time
Witward - stars fields were/are in the worx, space can be spooky too! ;)
grod4L - not this time around - but if someone else doesn't do a full Disney pack, that may be something to consider in the future.
rctmaniac - Sometime in mid-late May. :(
ytivarg - was wondering if it would be noticed.. ;)
Eletigna - thanks, I actually may need help on a few effects; I'll PM you if it comes to that; thanks again for your offer - I'm a fan of your work, and your horror models are perfect for this set.

Everyone else - many thanks. :)

[Plokoon111]

MAn I love this pack, I must see more *drools*

[Vodhin]

Simply fantastic yet again, Pumper! I wonder what other surprises you have in store for us? ;)

[JCat]

Viodhin - thanks - - mostly experimenting along the way - some things are planned, others are accidents. :haha:

Right now, I finished up a few pieces of furniture, redid the single arc piece, and added a blood stain overlay to slap on a wall of your choice. Tonight I'm starting more dungeon roof work.

[hiimmisterdude]

if you had stars and planets you can make a fake haunted space celing places like for a haunted museum.

[Deru]

Hello Pumper,
where are the pictures?

MFG
Deru

[drsheep]

Hello Pumper,
where are the pictures?

MFG
Deru
That was.......stupid.

[Plokoon111]

yo Deru theres a thing called pateience, and plus be happy that hes giving his time to do this for us, I mean he could just be mean but instead hes being generous! Well how about you go make custom scenery? I tryed it isnt a walk in the park. Just wait! Some day Pumper may be finished!

Pumper: Looking good :up: 8)

[Deru]

Sory but pumper has self written that it new pictures gives at
Saturday. but I have seen then no one pictures. so my ask is
entitled.

MFG
Deru

[Zen Coaster]

And obviously, there has been a delay. So just wait. Asking him about them accomplishes nothing.

[Deru]

Ok.

MFG
Deru

[Kee101]

any news on this set?????

[JCat]

A number of new objects were made over the last few weeks during my limited schedule; I should hopefully have a number of new screen shots up within the next few days. It's always more fun to have even more impressive shots then your previous posts, thus the delay.

As for release, we're looking at late May - this is going to be large.
Thanks!

[LightWarriorK]

I'm looking forward to it, my friend.:)

I may actually have to do the Bottom of the Well in my OoT Park... with all this great spooky scenery coming out, I won't be able to fit it all into the Shadow Temple..... hmmmm I better make some room.:p

Take your time, though... You know we'll all be impressed.:):up:

[gabird]

Wow Jcat, looks awsome like always. Can't wait to play with these goodies.
I have to say; you make some of the best and most used objects on RCT3.

OFF topic, are you going to update the support steelworks in the future?

Keep up the good work!

[JCat]

LightWarriorK - Thanks, Shadow Temple sounds like it's going to be pretty cool - I can wait until you finish it.

Gabird - Steelworx will indeed get an update after Screamworx. I'm working on some new ideas (in my head) - when Steelworx was created, we didn't have access to alpha tricks back then.

Oh, late tonight I should have a bunch of new Scream-shots.

[JCat]

04-28-06 Update

Note: The Lights are there just for illumination purposes, as it would be pretty weird to see a street lamp in the middle of a tile floor.

Pic1 - Blood Splat Overlay, Rusty Wall, and Column. A red fluorescent beam casts just enough light to see something appearing from the darkness.
Pic2 - A Nosferatu arc-like entrance with built in night lights.
http://www.trackworx.com/swx1.jpg http://www.trackworx.com/swx2.jpg
Pic3 -"Some" of the furniture, and a another floor tile.
Pic4 - A broken Brick wall, a single arc in the background, and Silent Hill's Pyramid Head awaits its victims.
http://www.trackworx.com/swx3.jpg http://www.trackworx.com/swx4.jpg
Pic5 Additional Rust walls including a 1/4 style riveted trim, some diagonal webbing, a smaller brick style wall and a pentagram.
http://www.trackworx.com/swx5.jpg

[joetomnj]

Ohhh, wicked looking stuff there JCat! Can't wait for the release of this in the future. :)

[marnetmar]

This all looks fantastic JCat, I can't wait to get this set in-game to check it out when you're finished :up: :up:

[Zen Coaster]

Oh SWEET-AS. That looks fantastic, well done.

If only you could code big doors that swung open, RCT2-style, this would be pretty much complete ...

shame you can't. :(

[~Coaster Kid~]

THIS IS FREKIN AWESOM DO U HAVE A RELEASE DATE PLANNED? I COULD MAKE A WALKTHROUGH HALLOWEEN MAZE WITH SOME STUFF IN THIS SET GREAT WORK

[hotroddude]

holy crap dude this looks AWSOME!!!

[Uries]

Yay furniture! Don't forget a bed :D

[RCT BOY]

kyaaaaaaaaaaaaaaaaaaaaaaaa!
Even if a ghost appears, I think that it is not unnatural. In JCat's ScreamWorx, it is a natural thing!

[grod4L]

PUMPER!

You're my hero!

The furniture is nothing short of spectacular, I'm so ecstatic you're making it!

I love this! So much!

I seriously can't imagine a more perfect scenery package...there's no words to explain how thankful I am that you're doing this.

[Chickenselects]

Reminds me of Saw... very scary stuff.

[Dattu]

I'm sure the dark rides released after this will be much more scarier.

[CoasterSim.Fan]

This is grate, this will defiantly make our dark rides better, and our spooky parks better. Can’t wait for a release.

[RCT-Spanky]

I really like the furniture very much. Gives a lot of new ideas. I also like the new walls and floors. Is that a bookshelf in pic2 on the right side of the arch?

[Zen Coaster]

I still think Michael Jackson should be in this.

*canned laughter*

[Deru]

Yes are that actual a good job.
that wait has itself was worth.

MFG
Deru

[YthySlz]

OMG Do you realize what that furniture means avondale manor will have lots of new rooms not to mention the REALLY scarey ride we can all make now we could never really scare ourselfs with the normal scary scenery but this wow we can sure get peeps adreniline rushing on scary rides now :up: :up: :up: :up: :up:

[Frogpole]

Pumper, I have been a quiet fan of your mods for quite some time. Screamworx appears to be your best work yet.

Might I suggest that you add some wallpapers too?

[Cyberleader]

=O(MG) :p

[ytivarg]

Jcat (It took me a long hard time to type that rather than Pumper :) )... Love the new items. One idea that immediately spanwed in my brain from the blood spatter overlay, and which is like the one thing that still creeps me out in haunted houses/movies/etc... handprints... bloody or not... think inside the house on Blair Witch Project. :up: Bloody handprints would look sweet meshed alongside the existing blood spatter overlay.

[JCat]

Hey, thanks for the comments all! Yes, I've got myself involved in something a big too big. I'm already up to the amount of objects found in the recent Mouseworx, and only about 60% through.

I'm currently back at exterior work, which started as basic brick walls/roofs which has now grown to something more more castle-like. I'm not going to go overboard in the exterior department, as there's enough custom and stock scenery around to build the outside of your house of horrors.


ytivarg - cool idea - I may "hand" over a pic of that soon.
Frogpole - Yes indeed - already in the works, thanks!
RCT-Spanky - Yes, it is - it's empty though.
Uries - Definitely including a bed - that's a must!


My only problem right now is effects matrix. Despite the documention mentioning how adding lights are a bit trickier then particle effects, I'm finding the oppposite results. If anyone out there can answer a few, with some simple problems I'm having, I'd highly appreciate it.

[sebar]

Ain't it just too bad that we can't do animated stuff yet? Well, this should go well with the current dark ride stuff for the community that you and Marnetmar have made so far.

[rctmaniac]

yet another great pack yay!!

[Pate]

I have to use this, man! You're God!!
And I still think michael jackson should be in this, too. :p

[Rybo-XL]

Nice, lol, I was gonna start a new darkride, yet I might have to put it on hold and wait for your glorious set to top it off....:D :up:

[LightWarriorK]

JCat, I don't know if you remember my Ghost Ride Thread (http://www.ataricommunity.com/forums/showthread.php?t=449782&) from way back when, but I thought I'd share the link again. I just mentioned it in grod4L's Avondale Manor, for inspiriation, and thought that you might like to have a look as well, just in case you're looking for more pieces to make. You were the first to reply to that thread, too.:)

Sorry, I can't help with the effect points... not quite my bag. But I'm very impressed and can't wait.:D

[Bokkie]

Nice, lol, I was gonna start a new darkride, yet I might have to put it on hold and wait for your glorious set to top it off....:D :up:

Know the feeling.. Going to hold on with my park for a bit

[JCat]

Ya know LWK - I totally forgot about that DR thread too - that was a great listing! I'll check it out now, as it may kick up some more ideas. Thanks

[Plokoon111]

I remember that ghostride thread that thread got me to register to this site, great memorys! Horray with the ghosts!

[hiimmisterdude]

YAY pyramid head dude silent hill rocked and he looks awsome. Everything looks great and I cant wait.

[UpTheClarets17]

I only have three words..."You Kick Arse"

[Sawyer]

This really is fantastic,

I'm starting a new park after my alton and these will go amazing !!

Thanks you =] !

[JCat]

Thanks :)

OK, within the next few days, the last set of preview shots will be shown and then it's on to the final stretch of the set.

So far, the total object count is 55 pieces, and I'm looking at about 75 by completion. Just need to work out how to merge beyond the 60 max icon grid.

I managed to figure out the particle effects situation (they're more complex to learn then the lights in my opinion), so I have a some very cool items to show in the final gallery.

Completion should be roughly.. Mid May.

[marnetmar]

Sounds Great JCat :up: :up: I never thought about increasing the grid for more than 64 "pieces". It probably won't be hard, just a bigger icon file I'm guessing.

I had an idea for something I was going to make, but you might be thinking about the same thing already lol I'll shoot you a PM ;)

[JCat]

As noted in PM - we think similar!! :haha: We've must of watched a lot of the same horror movies in our past.

Yeah, I think this 64x64 thing has sometihng do with with the importer option which lets you combine saved themes. I am so going to back up the files before attempting that.

[CoasterSim.Fan]

I believe you can just have more then one icon file so instead of just having one file 512 by 512 you have 2 files 512 by 512. Also cant wait to see the new pictures just remember that if the partial effects didn’t come with the game you will have to supply us with them too.

[JCat]

I believe you can just have more then one icon file so instead of just having one file 512 by 512 you have 2 files 512 by 512. Also cant wait to see the new pictures just remember that if the partial effects didn’t come with the game you will have to supply us with them too.

Re: Particle Effects - yup, I knew that, but thanks. So far, the particle effects are not firework designs reworked -- they are stock effects; no extra files needed to be copied in to other directories.

Thanks for the icon info, CSF! - that's right, forgot you can actually assign other icon grids.

[beelitz]

amazing work JCat!!!! Some of those imges reminded me of the movie SAW: blood on the floor and rusty looking walls. Keep up the fantastic work. Can't wait for this package to be released.

[JCat]

Here's a final preview, though there will be additional objects (not shown) when this pack is released. The various castles were thrown together within minutes just to show different configurations. I wanted a bit of everything as far as objects, but without going too crazy within one particular area of Screamworx. Some of the pix shown include a few more furniture pieces (mixing some modern in there for versatilty), one of three Victorian Area Rugs, a few of the wallpaper styles, a 'colorable' torch lamp for any wall style, and last but not least, a working fireplace.

http://www.trackworx.com/screamw6.jpg http://www.trackworx.com/screamw7.jpg
http://www.trackworx.com/screamw5.jpg http://www.trackworx.com/screamw3.jpg
http://www.trackworx.com/screamw4.jpg http://www.trackworx.com/screamw1.jpg
http://www.trackworx.com/screamw2.jpg

[camandjack]

YES! I can't wait!

[Six Flags]

I want it so bad, me want now :D jk lol. Great job!!

[marnetmar]

Looks excellent JCat, this will really add a lot more options for dark rides. Great work on the fireplace too ;) :up: :up:

[drsheep]

Its so unfortunate some of you geniuses don't actually work for Frontier. It seems a lot of these items are far more useful than the defaults. Nonetheless, PERFECT THEMEING!!!!!!!!! My god, this is going splendidly!!!! I love your castle pieces, I can finally finish my Cathedral from way back when!!!!! AAAAAAAAAAAAH! Excitement.

[Maxxin]

You know, its unhealthy for me to look at all this upcoming stuff, but i feel i must... and end up look like this guy. :bulb:

[rwk]

Wow, now our dark rides won't be so "wimpy". The possibilities are endless. We can have authentic haunted mansion rides or Castle Dracula's. I did a dark ride which is based on a real dark ride that burned down a couple years ago, it was called Castle Dracula and it had a walk-through and Dungeon boat ride and it was located in Wildwood, NJ at the Nickels Midway Pier across from one of the Morey's Piers. It originally opened in 1977, and the old mill boat ride 1919. There was a fireplace in the great front room once you entered the castle from outside through the huge double wooden doors. Here is a site about the castle http://www.darkinthepark.com/Dracula/cdPictures/cdentrance.htm This should give you some ideas for objects, I want a chandelier like in the picture. That haunted attraction really freaked me out! There were live people hiding behind corners ready to scare you. It was more like a guided tour where you would meet someone in each room that would give a spiel then send you on your way. The boat ride was pure scare, with live actors lurking around. Lots of torture scenes.

[RCT-Spanky]

I love your castle walls too. You should collaborate with The Cook and send him the texture of the castle walls. Maybe he can make additional wall-fillers for his Ecclesiastical Theme with your texture. And I agreed with some others here ... grod4L's Avondale Manor will have a lot of new rooms with your set ;) :)

[Uries]

Gah love the bed. Only thing I don't like about the castle walls is that they aren't perfectly aligned.

[LightWarriorK]

:eek::up:

[JCat]

Thanks for the comments! :up:

- I still have a few weeks of work, and the castle walls were already on my alignment fix list, among other objects. I tend to create draft" items, then during the final phase, I do most of the corrections. That way, it doesn't get too boring/tedious, working night after night with the same object style.

Current mesh in the works: A four candle/light bulb Gothic chandelier.

[Frogpole]

Working fireplace? WORKING fireplace?!? Oh my..... :cool:

We're not talking about an animated object though, are we?


*Puts on suitably impressive suit so as to be suitably impressed*

[lewtheo]

wow, an animatric, of a fireplace, didn't know anyone had done these before.....Released their own animatrics.........

[JCat]

:) The fireplace is not an animatronic, the same way any of the torches or lamps in the game are not. What I meant by working fireplace was that it has its own working fire (you don't need to plant an effect there).

[Fisherman]

Hey JCat, I was wondering if you were including a blood splatter overlay for the floor/ceiling too...or just the walls. Everything looks GREAT...very spooky!!

-Derek

[JCat]

Fisherman - yes, floor/roof has its own splat of blood. Thanks :-)

Here's a self explanatory item. Might be shooting for a torch version as well
http://www.trackworx.com/chan1.jpg http://www.trackworx.com/chan2.jpg

[Startours_3000]

Grod4L Is gonna LoVe The Chanderliers

[marnetmar]

Very nice work on the chandelier JCat :up: :up:

[Dattu]

JCat, I think that what you are doing is wonderful. I think that the entire community loves you now. :D

[MDEKing]

Looking very good, can't wait for the download!

I think that the entire community loves you now. :D

Always have. :p

[CoasterSim.Fan]

What else can we say this just keeps getting better and better. I defiantly see a new surge of dark rides in the community.

[grod4L]

I think I just died

*checks pulse*

yep, I'm dead

[Dattu]

I think I just died

*checks pulse*

yep, I'm dead


Be sure to tell your family to put Avondale on the Internet before... too late. :(

[joetomnj]

Oh man, This is gonna be one "killer" pack there Jcat! (As proven by grod4l LOL)

[SCAREcrow22]

HOLY FRIGGIN DOUBLE FRIGGIN TRIPLE FRIGGIN QUADRUPLE FRIGGIN QUINTUPLE FRIGGIN SEXTUPLE FRIGGIN okay what's the word for seven? lol

Anyway, I just happened to be roaming around the forums and stumbled upon these new screenshots and HOLY FRIGGIN DOUBL... you get the picture. THIS IS AMAZING!!!!! I especially like the apparitions appearing out of nowhere and the bloody skeleton hands reaching for their victims... And as many of you know, I am a FREAK about halloween and scaring people, and this will come in major handy for the millions of dark rides I always wanted to do!!!! JCat, you are amazing. I CANNOT wait for the release!!!!!!!

[ryguy222]

this is looking great pumper. This is just another great set to add to your collection.
-ryguy222
p.s holy friggin!

[Zen Coaster]

words I think this guy is excited Jcat :p

As are we all.

[Frogpole]

I am so excited that I may weep openly.

[JCat]

Thanks, folks! This is like a job where your pay check is converted into great comments. :)

One of many 2D alpha mask props
http://www.trackworx.com/baby.jpg

[hotroddude]

^ hah dude thats awsome! all of your sets kick @$$

is that hole thing just one wall?

[SCAREcrow22]

HOLY FRIGGIN I JUST WET MYSELF OF EXCITEMENT AND YES I'M EXCITED!!!!!

[JCat]

Hotroddude -

They are all separate objects: Blue wallpaper, a 3D chest, an area carpet and Baby KillYou, which is a 2D Alpha cut, and has the coordinates of a half size wall. 2D alphas save a lot on polygons.. and have the same desirable effect as a spooky 3D object, as long as you're not viewing it from the side.

[weasel497]

Woah! You changed your name!!! I just noticed. lol

This set is looking very good! Can't wait till the release!

[marnetmar]

Very cool stuff JCat :up: :up: Such a cute little baby ;) :eek: :eek:

[Vodhin]

JCat! I love that baby! (reminds me of one of my old dates from years ago..) absolutely fantastic work!

[Coastermaster]

Really cool. Amazing.

[Cyberleader]

:up:!! I can never say anything else!

[k_peek_2000]

Thanks, folks! This is like a job where your pay check is converted into great comments. :)

One of many 2D alpha mask props
http://www.trackworx.com/baby.jpg
that is the scariest effin thing ive ever seen. I NEED IT!

[JCat]

Thank you recent commenters.

Up close that baby is nasty. Again, it's only 2D (not a 3D model or that would have been a poly-killer).

There's some really awesome objects that have not been shown yet - including a door way (with accompanying open door) which is cool when entering from one room to another, a Chainsaw (model), and a wall mounted skull lamp. The package looks like it's going between 80-85 pieces.

[RCT-Spanky]

The package looks like it's going between 80-85 pieces.

That mean a lot of scrolling up and down. Anyway, the set looks so awesome. I love the new chandelier. Is there a sepereate chain in the pack too for change the length of the chain for the chandelier in the middle?

[COASTERMAN2009]

Hey there Every time i download your custom supports when i go and click on it in the the game my game freezes up on me i do not know why it keeps freezing up do you have a solution to this problem i have soaked and wild oh bye the way great work you do thanks

[JCat]

That mean a lot of scrolling up and down.

:haha: Yes, but I'm sure everyone would agree, that's a small price to pay for a s#$t load of objects.

COASTERMAN2009 - it works perfectly for everyone, but sometimes, when this happens, it may mean the installation could have skipped something. Reinstall it. Make sure you have the latest version which was updated sometime in November - anytime before that would have been the "pre-wild" version, and won't work.

[marnetmar]

:haha: Yes, but that's a small price to pay for a s#$T load of objects.

I agree 100%

[COASTERMAN2009]

Hi Again Do you have the latest file for this that will work with wild i would like to start using your custom supports thanks again jcat

[marnetmar]

Hi Again Do you have the latest file for this that will work with wild i would like to start using your custom supports thanks again jcat


http://www.trackworx.com/Steelworx.html

[rwk]

Will this be out before the end of May? I can't wait! I like dark rides! I have ridden a bunch in my lifetime. Some of them that I rode are now closed or gone. RCT3 is like a virtual dark ride sim, you can build a dark ride and ride it. I wish there was a way to make moveable crash doors with collision detection so that the cars hit the doors and they open? The previous RCT's had that.

[SCAREcrow22]

Um, thanks for the update, rwk. :rolleyes:

[JCat]

Will this be out before the end of May?

Yes, for sure, rmk. I may punch out a video preview this weekend if I get some time.

[SCAREcrow22]

AARRGH!! I am SOOOO impatient!!! Come out soon, come out soon, come out soon...AW CRAP! I forgot to tap my ruby slippers!

[Dattu]

AARRGH!! I am SOOOO impatient!!! Come out soon, come out soon, come out soon...AW CRAP! I forgot to tap my ruby slippers!



...What? :bored:

[gabird]

Dang! Jcat, You guys are amazing with these custom theme objects...I was amazed with the darkride collection. Soon RCT3 is going to be an unlimited operating little universe. Man I cannot wait to see what you do with Steelworks upgrade. Your willingness to do this without profit is also amazing.
Keep up the awsome work you and the others are doing for this game.

And they think Thrillville is going to compare to This!?

[beelitz]

That baby rocks haha

[SCAREcrow22]

...What? :bored:

I guess you've never seen the Wizard of Oz.

[Maxxin]

JCat, how far are you now (approximently?)

[beelitz]

JCat, how far are you now (approximently?)


I hope it is really quick.. Love the Steel and Mouse Workx and can't wait for this one. :bulb:

[JCat]

Thanks guys -

About 90% done; lots more interesting objects were added since the last screens. I'm hoping by next weekend, I'll be finished, baring no real life interruptions.

[beelitz]

Thats GREAT news!! Good luck to you.. :)

[East_Aer82]

I can't wait to get back to work on AtmosFear. Everything I've seen is so perfect for Countess Elizabeth Bathory's castle. Thank you sooooooooo much!

[ryguy222]

i can't wait for this to come out. I didn't think i'd use them but i started a multi demsnional coaster and i want to make it haunted. Good job so far
-ryguy222

[JCat]

Thanks - Almost complete. Had a stupid-busy work week - did a few more tweaks and alignments last night, added a few more objects.. need to elminate a few objects, and then on to icon creation.

My guess is a few more days till contact - but tonight I'll post some more pics for those who have been patiently and impatiently waiting. :haha:

[Small Print]

Sounds good.:up:

[g654]

Awesome!!!
This set is teh crazy!!

[JCat]

Screamworx is nearing completion, though as mentioned, I had a hectic work week, so it pushed things around a bit. It won't be much longer though...

http://www.trackworx.com/screamfinal2.jpg http://www.trackworx.com/screamfinal3.jpg
http://www.trackworx.com/screamfinal1.jpg http://www.trackworx.com/screamfinal5.jpg
http://www.trackworx.com/screamfinal6.jpg http://www.trackworx.com/screamfinal4.jpg
http://www.trackworx.com/screamfinal8.jpg http://www.trackworx.com/screamfinal7.jpg

[marnetmar]

Awesome new pics JCat :up: :up: :up: :up: :up: I especially like the ghosts & the chainsaw lol My kind of "goodies" there ;)

[Fisherman]

Those ghosts are sooooooooooooo awesome! Thanks JCat! Cannot wait!!!

-Derek

[DarkMeasures]

I don't feel like going through all the posts, but I am wondering if you will include pitchblack walls and ceiling pieces because I would rather have it that I don't need to use Martemars and the other guy's darkride pieces. (NO offense, but I want to limit my scenery groups to Shyguy's and Worx themes.)

[Dattu]

I'm already scared about what other's will create with this set! :up: :up:

[marnetmar]

I am wondering if you will include pitchblack walls and ceiling pieces because I would rather have it that I don't need to use Martemars and the other guy's darkride pieces. (NO offense, but I want to limit my scenery groups to Shyguy's and Worx themes.)

The "other guy" you mention is JCat, the artist formerly known as Pumper lol

[JCat]

Thanks for the comments. Yeah, as Marnetmar mentioned, I am the "Other Guy". In fact, it says JCat's Dark Ride Set right in RCT3. I won't be adding black walls/roofs or combining from the original set, only because this set is so flipping large already. I understand it would be less themes to have to shuffle through, but the amount of objects you're going to have to scroll through, would probably take just as long as simply clicking on the older set and grabbing one of the needed pieces. In addition, Marnetmar's objects compliment this set as well, particularly his spiders which now have a nesting place. :haha:

Something cool - the 5th screen shot which has the castle in the background with the bright green ghost (which is actually a blue one before lighting). If you put any type of torch or fire emitter near it, its red eyes actually pulse which I didn't even realize until I saw it by accident.

[joetomnj]

Man JCat, those screenies look fan-tas-tic! I can't wait to get this set for sure. !!!!!

[CoasterSim.Fan]

Looking really nice. The items are so detailed I can only imagine how long you must have spent on this set. You defiantly have alpha textures down. I can’t wait to see how people incorporate this set in to there parks. Something tells me it will defiantly make them spookier.

[Spinout]

Wow, those are amazing. That chainsaw is so awesome. I think you should make blood splatters its own object so you could put those anywhere.

[JCat]

Thanks ^ ^ ^ all

Spinout - the blood splatters are seperate objects. ;) Those splats of blood are actualy two stamped overlays - one above the other, and way above that you can see a set of bloody handprints (they're blood-red too, but because of the lighting in that particular shot, they gave off a bit of a reflection).

If you look at some of the earlier screen shots from weeks back, you'll see the blood stains alone.

[rctmaniac]

this is going to be another classic set from Pumper!! :up:

[Cyberleader]

:up: I love that chainsaw MWAHAHAHAAA!!!

[YthySlz]

Jcat something tell me you enjoyed doing this which scares me very much :confused: BUT its really fantastic and really scary well done!

[East_Aer82]

The banshee makes me really happy! Ooooohhh can't wait!

[JCat]

East_Aer82 - thanks, that Banshee is 2D, he's pretty cool though - especially behind a window or popping up out of some other scenery object.

YthySlz - I swear I'm not that much of psycho. Actually, I'm a massive dark ride and horror/sci fi movie fan. But, interestingly enough, I don't like slasher films or gore. I tend to like horror classics, but with Screamworx, I chose to cater to fans of both. Thanks!

[banana38]

Wow. I like to have some of those objects for one of my parks. Would you happen to have furniture like stuff as well? And how about a transparent spider web wall?


That's a good idea.The transparant wall I mean.Cool.If someone made that I would totaly use it.:up:

[YthySlz]

doesnt matter if yoiur a physco or not if you produce costom scenery like this were all happy to be friends with a physco lol..... anyway i must say im going to have to put a dark ride in my park now becuase im dieing to use it and i think the gore peices is quite cool actaully becuase only some gost trains have gore pieces in so it will be more fun to use.... BUT my most fave peiece at the moment has to be the scary archway with the demon like bat scary thing lol TO SUM THIS ALL UP! FANTASTIC WORX!

[Beldin]

I'm thinking a slow, water-based ride (kinda like Pirates of the Caribbean). It's a great break on a hot day at the park.

[Frogpole]

I swear I'm not that much of psycho. Actually, I'm a massive dark ride and horror/sci fi movie fan. But, interestingly enough, I don't like slasher films or gore. I tend to like horror classics, but with Screamworx, I chose to cater to fans of both. Thanks!

The splatter/gore pieces are the stereotypical ones you'd have found in any 80's horror film - which is precisely what we need as they're the sort of thing you'd find in a haunted house.

[baz6174]

I cant possibly put into words how i feel about the release of this set, but i will try.... (sits a few mins thinking). Nope i cant add anything that hasn't been added already, so i will just say thank you for doing this JCat, it will enhance any park. Judging from your last sets, this is gonna rock! any ideas on whats next? (sorry if i seem impatient).

[sebar]

Yes this will be excellent for the platform. Thanks Jcat for your hardwork on this.

[JCat]

Thanks -

Should be up within the next 2-3 days max.

I just added a number of bare bones (no pun intended) particle effects which can be used for anything (like Fronteir's Mist, Smoke), but are also effective when combining with some of ScreamWorx objects. For example: One of the particles is a white cloudy effect which alone looks kind of ghostly - and if you stick an apparition in there, it's a sweet spooky combo!