Effect point co-ordinates

[Usf geek]

I need to know where to put the co-ordinates from Milkshape Into the Importer.

Thanks

[Belgabor]

Into the first three boxes of the bottom row of the matrix. The main diagonal (upper left to lower right) has to be all 1. What you need to fill in depends on wether you use my importer and the fix orientation flag or not. If you don't use it, you have to put in the coordinates as measured (x y z), if you do use it, it's x -z y if I remember correctly.

[Usf geek]

Thanks, Worked a charm!

[Usf geek]

Ok, I've got the whole postioning thing down. Just 2 slight problems...

http://img169.imageshack.us/img169/5232/shot0046hl6.jpg
Random black spots

http://img169.imageshack.us/img169/8194/shot0047dt4.jpg
And It doesn't actually light anything up!

[Belgabor]

Two possible reasons:
- You used simplelight which doesn't light anything up
- The radius is too low. According to Vodhin it should be >=5