Curved Concrete Walls

[StarRngr4.0]

NOW AVAILABLE



This group of Custom scenery items are based on a percieved need for my present park project. I needed certain types of walls and didnt see them in any of the presently existant CS, though I could be wrong.

So, soon to be released are my Curved concrete wall sections.

http://img66.imageshack.us/img66/9688/sldcrvjk9.jpg solid wall pieces.

http://img66.imageshack.us/img66/9108/sideyl4.jpg
Side view of the set in action.

http://img295.imageshack.us/img295/9168/xraydht3.jpg
Unfortunatly, My attempt at window pieces generate that cursed X Ray effect.

This set should be available for release in the next few days, as I found an error in one of the meshs that needs to be corrected while assembling the pieces for the above screenshots.

As mentioned in the latest post, it is now available at:
http://www.vodhin.net/RCT3Community/download.php?view.377

[danhillman693]

Cool, I think this set will be quite nice. Great job so far!

[LuckyGirl]

Cool idea Star! However, try to align the walls a bit more. There are still quitre some gaps between them - I know, getting completly rid of them is difficult, but just by resizing them by 0.01 might do :p

[StarRngr4.0]

I know. I saw that as I put the SS together, and I'll be tweaking the mesh in question sometime tonight or tomorrow.

[danhillman693]

Which program are you using?

[Belgabor]

Getting round walls to behave is difficult. You need to finish off each rounded part with a small straight one, otherwise aligning them properly is futile, as lighting will still make straight/rounded seams between items visible.

[StarRngr4.0]

I'm using blender. Yes, Bel, I understand what your saying, but to kinda be honest I'm getting tired of dinking with this... I'm about ready to pull a frontier and say "I dont care, I'm calling it done and shipping it"

[coinich]

Have pride in your work! :mad:

Seriously, I thank you and all CS creators for all of their work, both done and undone. It IS a tremendous amount of time you all have put in for the rest of us (some, like me who are too lazy to do it ourselves) and I truly thank you for it.

[StarRngr4.0]

Here is how the set looks after correcting the curved wall mesh to conform to the quarter sphere pieces, which was the only goof... I think?

http://img154.imageshack.us/img154/5791/sr4cwwinru3.jpg
the window pieces

http://img176.imageshack.us/img176/4542/sr4cwsolfl7.jpg
the solid pieces

http://img176.imageshack.us/img176/390/sr4cwsidetk2.jpg
side view showing both types.

[Coaster Freak]

This is something I would like to have! Dont give up!

[StarRngr4.0]

Ok, I've tweaked all I can on these, I cant tweak anymore.

Will be ziping these up in the next 24 hourse for submission.

Here is a view of the 'window' side of my dread PillHause test building...
http://img99.imageshack.us/img99/6831/frontfinqy1.jpg

and the 'solid' side....
http://img150.imageshack.us/img150/3603/backfinhp2.jpg

[osudenny]

Looking Good

[RCT-Spanky]

This is by far one of the sets, that I have most waited for ... no joke!!!

I wish, you will make the whole set colourable too, because, this are the perfect objects to build some domes like on this picture:

http://www.coastersandmore.de/rides/wintertraum/winter13.780x579.jpg

[NeoPuma]

Yay! I've wanted these for a while, especially without the collision detection. Nice work mate!

[StarRngr4.0]

Well... Its a bit late for some of those requests, except to be folded into V1.1; I'd submitted to Vohdin over sunday night...

and its been aproved and available HERE:
http://www.vodhin.net/RCT3Community/download.php?view.377

[Coaster Freak]

SR is an idiot

No! Idiot is harsh! ID10T is the way to do it!

Ok so LOVE that walls and stuff! It would be nice to have this beacause it has good use.

[smjm1982]

this is great but can i make a completely circular building of, say, 20x20 (another words, do you have pieces of varying radius in your pack)?

[coinich]

No, last I checked there were no pieces with a radius greater than 1. Only The_Cook has, to the best of my knowledge, released any pieces for a curve with a radius greater than one, and his pieces are adventure themed and only go to a radius of 2.

Looks great, SR!

[The_Cook]

Only The_Cook has, to the best of my knowledge, released any pieces for a curve with a radius greater than one, and his pieces are adventure themed and only go to a radius of 2.


I've got various curves in Atlantis textures, ready to go into the next update of the Atlantis vaulting pack. I also have the same again, but in brick, patterned brick and stucco for a new pack that I'm working on.

[Nethero]

Perhaps make a cement floor while you're at it.

[Old-Spice]

Perhaps make a cement floor while you're at it.

Wow, Dude...WTF??? u cant see theres a floor in the building.......


oh god, please help atari......

[AJM]

looks cool, and alien-esque, i like.

[Nethero]

Wow, Dude...WTF??? u cant see theres a floor in the building.......


oh god, please help atari......

That thing is the floor? I was expecting it to look more the the terrain texture.

[madshell]

Are they recolorable?

[rctmaniac]

Madshell-I believe not.
SR-These are great, could you send them to me? I believe these would be great recolourable, and if you dont want to I will. Obviously I will give full credit to you for the models.