[REL]Water World Set 1 (Version 1.1 released / 11-11-07)

[shyguy]

Water World Set 1 v1.1 released!





http://img180.imageshack.us/img180/3498/beachhouseku2.jpg (http://imageshack.us)

2 new pieces have been added for version 1.1. You will need these if you want to view the Water World park when it is released for download.


http://img220.imageshack.us/img220/7580/piecesjh3.jpg (http://imageshack.us)
2 new Planter Cover pieces.



Download at my site

Shyguy's World (http://shyguysworld.com/)








Here's a little something I've started working on...


Terrain Planters
http://img54.imageshack.us/img54/2848/plantersjb5.jpg (http://imageshack.us)


These are raised, terrain covered, pieces that can be used as planters. They will fit most curved wall pieces, including all of Cook's curved walls.

Aroundthehorn started a similar set, but I think he isn't working on it any more. Correct me if I'm wrong, ATH.

[LightGrenades]

Nope. I am not. Don't have time

But, something that has been needed for some time. Thank you.

[NYRfan85]

That looks very nice! I have been wondering if something like this was going to be made by somebody.:up:

The terrain on these pieces will match the terrain's texture, correct? Like, if there's snow under that piece, the top will have snow too?

[errt]

There are round terrain covered pieces in my new set, but I don't know exactly, how the line up with rounded walls.

[LightGrenades]

The terrain on these pieces will match the terrain's texture, correct? Like, if there's snow under that piece, the top will have snow too?

Yes.

Edit: I know you don't do requests, but would you consider making some mulch, using the same shapes as the terrain blocks?

[shyguy]

Another pic...


http://img71.imageshack.us/img71/7229/planter2cv7.jpg (http://imageshack.us)


Yes, these will match whatever terrain you put under them. And they won't be path covers, as they will be raised above the paths.

[ytivarg]

Very nice.... just wondering if effect points (like the new Garden Walls (Sit On It) can be used so peeps will sit on the edges of the planters.

[--Griffon--]

Very nice, this will be helpful to people that want detailed groundwork.

[{Freak}Rct3]

wow looks great

[°Celsius]

I thought you weren't doing scenery for awhile, or at all for your park.

[{Freak}Rct3]

who says it is for his park???

[adamb241]

looks really good

[Dark_side300]

Looks great shy guy!
ive needed somthing just like this for one of my parks.
this will be brilliant. good work!

[°Celsius]

who says it is for his park???
I thought you weren't doing scenery for awhile

There was 2 different statements there. 1 was "i thought you werent doing CS for awhile"
2 was "and not at all for your park"

[{Freak}Rct3]

sry missed that one...

[MeJayBe]

Great idea ShyGuy... great to see you back in the mix!

[supercoolsuper]

Cant wait

[Maylene]

looks great shy nice job cant wait to use them

[armstrong8991]

nice...I love it that your back making stuff!

[Buckface921]

Very useful! Well done.

[lego3366]

they look very nice! its nice to see your revolutionary sets up and running again!

[Fifa06duDe]

Wow that looks great. This is very helpful, I would use it alot. :up:

[coasterfreak]

WOW, it's so glad to see that you are still around these neck of the woods,lol

But now I must say, excellent work, brilliant! This set will definately be used by alot of people, including me. Thank you for taking the time to make these!

welcome back...:up:

[rctman12]

amazing i love it !!!!!!!!!!!

[RCT-Spanky]

It's a great idea and I would like to know, how did you manage it, that the texture of the ground is inside the planters.

I know, you don't like request, but if you can make please also very small curved pieces, so that a whole ring of four curved piced just cover one tile in RCT3?

And The_Cook's textures are great, but I think, that this pieces will also look great with the the textures of your main sets (Alpine Set Stucco and Stonewall, Catfish Cove Brick Walls, Main Street Brick Walls)

[thiery]

waouh Shyguy !
do you create curved boardwalk to use with your main street CS ?

[citytrader]

Shy,

These are incredibly versatile, and I thank you.

I predict they will be showing up in a number of parks!

[Ryani210693]

Looking goooood Shyguy.

Just wondering though, with having paths all the way up to the edges of the planters, this will mean the paths will go through them, and therefore wont we have peeps walking through them?

Ry.

[NYRfan85]

Looking goooood Shyguy.

Just wondering though, with having paths all the way up to the edges of the planters, this will mean the paths will go through them, and therefore wont we have peeps walking through them?

Ry.

I too was wondering this.:noob:

[shyguy]

Very nice.... just wondering if effect points (like the new Garden Walls (Sit On It) can be used so peeps will sit on the edges of the planters.
I'm not making the planter edges, just the terrain covers that go inside.



I thought you weren't doing scenery for awhile, or at all for your park.
I changed my mind. :p



It's a great idea and I would like to know, how did you manage it, that the texture of the ground is inside the planters.
I didn't come up with this idea. It's already been done in a few other sets. It's a standard feature in the Importer. Just set the mesh texture flag to "Terrain".



I know, you don't like request, but if you can make please also very small curved pieces, so that a whole ring of four curved piced just cover one tile in RCT3?

I can make a circular cover to match some of Cook's round shaft pieces, which are one tile wide.



waouh Shyguy !
do you create curved boardwalk to use with your main street CS ?
Do you mean a curved sidewalk? If so, no, I'm not making that.



Looking goooood Shyguy.

Just wondering though, with having paths all the way up to the edges of the planters, this will mean the paths will go through them, and therefore wont we have peeps walking through them?

Ry.
The only place the paths will go through is at the rounded corners, but you can solve that problem using path covers from other sets. Or, don't put them on paths at all, like in the pic below.




http://img409.imageshack.us/img409/4737/planters3dk7.jpg (http://imageshack.us)
Terrain Covers used with Cook's Gothic large curved walls.

[ThingMaker]

Those are lovely, SG! Great work like always.

[osudenny]

My gosh shyguy welcome back. Just love you object and this new set will be just as great I am sure!!!

[LuckyGirl]

I am honestly excited that you make a new set :heart:
Those planters look great!

[Weavious]

Very nice! CoasterCowboy67 (for Fiddlevision Studios) and many others will use this quite often.

[shyguy]

Another pic. Not sure if this is what Spanky had in mind, but here's the round, one tile, terrain cover.



http://img402.imageshack.us/img402/4954/planters4ww3.jpg (http://imageshack.us)
The walls are Cook's. The paths are Aceana's. The only thing I did was the terrain piece inside the round planter.(shaft from Cook's Atlantis Set)

[Maylene]

:up:

[rctman12]

amazing`!!¡¡!¡!¡¡!!!!

[RCT~Hero]

Well SG, this is very good, not amazing, but very good. Anything you do will get people loving it

[xss277x]

This looks nice, its not much but its good for what it is. :up:

[kylr23]

:D:up: anouther useful set by shy guy nice job

[shyguy]

Wooden Covers


Also included in the set will be many path covers, etc.



http://img528.imageshack.us/img528/7420/coverssj3.jpg (http://imageshack.us)
These wooden covers are being used in my new, Water World Park.

[supercoolsuper]

Very nice! But do the stairs fit the pool stairs nicley?! I know they are full tile which is good but do they still fit?

[LightGrenades]

Love it. I love the Catfish Cove set. Love the new railings.

Thank you.

[shyguy]

Very nice! But do the stairs fit the pool stairs nicley?! I know they are full tile which is good but do they still fit?

No. I am not building a set to cover the pool pieces. Just a couple basic pool ones, but the majority will be for normal path and bridge pieces only.

[supercoolsuper]

No. I am not building a set to cover the pool pieces. Just a couple basic pool ones, but the majority will be for normal path and bridge pieces only.
I see what you mean. It would be helpful though but thats fine. You will see what I mean once you get to that part. But anyway, this isnt a request. Cant wait for more surprises. :up:

[Weavious]

As usual, this looks great!

[ytivarg]

No. I am not building a set to cover the pool pieces. Just a couple basic pool ones, but the majority will be for normal path and bridge pieces only.

Will the pool pieces you are including be in this same wood fashion? I'd love if they were... I've been dying to do a woodland-themed waterpark ever since Villain Valley's Lost Boys Lagoon... these would be absolutely perfect to hide the ghastly in-game tiles with some style. :up:

Very, very nice so far.... I don't know if I've said it in the past... but the current state of this forum reminds me to thank the CS creators that really put out quality stuff... (and put up with the nonsense in the forums, to boot)... so: your work is extremely appreciated. :up:

[shyguy]

It would be a huge project to make a versatile pool cover set. There is the NYR Pool Cover Set, which has a lot of pieces, but is still quite incomplete. All you can expect from this set is a couple flat pieces and some inclined ones. These are just to help blend in with the normal paths in my Water World park. Just check out Water World to see what I'm making.

If there is a simple piece you need, I might add it, but there are so many different shapes that you'd need to fit around the pools, that it's just something I'm not interested in attempting.

[supercoolsuper]

It would be a huge project to make a versatile pool cover set. There is the NYR Pool Cover Set, which has a lot of pieces, but is still quite incomplete. All you can expect from this set is a couple flat pieces and some inclined ones. These are just to help blend in with the normal paths in my Water World park. Just check out Water World to see what I'm making.

If there is a simple piece you need, I might add it, but there are so many different shapes that you'd need to fit around the pools, that it's just something I'm not interested in attempting.
Hmmmm. I see what you mean. But, I would like to see a picture of those stairs on the pool stairs please. Just a picture of the stairs you created placed right on top of the pool stairs. Thanks!

[jessknight1]

I think it would be not only easy for you, but useful for us, if you made peices to cover the square shaped pool. It would only require 2 different covers.

It would save doing the 100's of different shapes, and would slightly benefit us. I seriously hope someone isn't fussy enough to ask to much more of you.

By the way, since I haven't said it yet, I'm in love with your work, and your custom scenery. You do amazing things with everything available to you.:up:


EDIT: Super cool super. Look here: http://www.ataricommunity.com/forums/showpost.php?p=9238477&postcount=338

First picture, with the closest bridge.

[Caffinated]

Very nice looking stuff shyguy, thanks for deciding to work on this and release it to the masses.

[sr3d]

Looking great shyguy :up: Thanks for making this set and keep it up :up:

[stormrunner2592]

this is great keep it up

[°Celsius]

Ya, didnt see this coming.

But i cant complain, cause ill use these pieces as often as your others

[supercoolsuper]

EDIT: Super cool super. Look here: http://www.ataricommunity.com/forums/showpost.php?p=9238477&postcount=338

First picture, with the closest bridge.
Thanks! But I have already seen it and thats the gentle slope. I meant the ones with staris. There arent any of them that actually fit it.

[Mcfresh]

All your CS Sets are great, the best ones on the forums. I'd have thought you might feel like taking a rest from CS but i'm not complaining, looks great! Love the round path covers!

[RollerMePlease]

Mind blowing set, Shyguy. I'll definitely use this in Dynamite Islands! :up:

[Nethero]

Every single set you make is extremely usefull. Great set! But, uh, how far can you zoom out till it disappears?

[kylr23]

looks nice now to do some supports for slides.

(i can help)

[mcjaco]

These will be most helpful Shy. I was totally stuck on the west side of Futire World with out something like this for the planters.

Thanks!

[Master_Player09]

Another amazing set. Great job!:up:

[citytrader]

Very nice set.

Thank you again for all you give back to the community.

[shyguy]

For supercoolsuper...



http://img69.imageshack.us/img69/5954/stairstu0.jpg (http://imageshack.us)

[citytrader]

Very, very nice!

[RCT-Spanky]

Yes Shyguy, that's exactly what I mean. Thank you very much. I also like the wooden pool covers. I hope they have a good protective paint, when the peeps walk on them with their wet swimming gear.

[NYRfan85]

It would be a huge project to make a versatile pool cover set. There is the NYR Pool Cover Set, which has a lot of pieces, but is still quite incomplete. All you can expect from this set is a couple flat pieces and some inclined ones. These are just to help blend in with the normal paths in my Water World park. Just check out Water World to see what I'm making.

If there is a simple piece you need, I might add it, but there are so many different shapes that you'd need to fit around the pools, that it's just something I'm not interested in attempting.

Those few pieces you made are more than enough to make it blend with your path covers, as you said, so this is just fine. I don't blame you for not wanting to get into making covers for every possible pool shape, because there are so many possibilities due to the four different types of pool tiles. This is why I didn't originally attempt this, as it would be pretty difficult, and not to mention probably a LOT of extra pieces that I wouldn't really use much myself. However, if I ever get to it, I may make a Pool Cover set 2 that will include these type of pieces and lazy rivers, but I digress. Looking good shyguy!:D

[kylr23]

nice

[Dan Mc]

wow, nice set. is there any chance in you makeing some more ground covers so we can make a basic rct2 stlie hill? if you could do that it would help me out a lot.

Thanks

Daniel McIntyre

[supercoolsuper]

For supercoolsuper...
:D Thanks. You didnt have too but thanks. It was really a suggestion. But I dont understand why the in-game paths for pools are so small. I have never seen anything like that in real life.

[Crispylad]

Well Another great sg set for my next park:D

[sr3d]

Looks like another great set from another master :up:

[Coastercool]

well shyguy this looks great and I have ways to use this already...

[kn717]

another shyguy masterpiece.

[Toddthefox]

Cant wait for this set!

[shyguy]

Unfortunately, to make decent waterslides, you need decent supports. So I'm going to have to make some... :(



http://img237.imageshack.us/img237/8339/supportscc2.jpg (http://imageshack.us)
It will take 3 basic pieces to make a support. There will be several versions of the top piece to fit various slopes.

[DreamTheater2005]

All I have to say is, that's perfect. That's just another thing that you must have.

[adamb241]

i have 1 question what quallity did you shoot that pic in, the 1 on post 30


cuz the water never looked so clear on my pics

[--Griffon--]

This will help a lot of people make better pools. Great job shyguy!

[citytrader]

Those support pieces are very nice. I see some real possibilities with them for mini and junior coasters as well.

One more time, thank you so much for taking the time to give back to the community! Thanks!

[kylr23]

shy guy you want me to help you i got google sketch up tell me what files to send them as and ill make some for you

[TycoonThing]

Unfortunately, to make decent waterslides, you need decent supports. So I'm going to have to make some... :(


Well Iceacts made some already

[shyguy]

i have 1 question what quallity did you shoot that pic in, the 1 on post 30


cuz the water never looked so clear on my pics
I have it set on reflective water. You need a good graphics card for that setting.



shy guy you want me to help you i got google sketch up tell me what files to send them as and ill make some for you
Thanks, but I can manage.




Well Iceacts made some already
They're only for curves.





I've done a little more work on the Waterslide Supports.


http://img461.imageshack.us/img461/8009/supports2hy6.jpg (http://imageshack.us)

[vilate]

Nice improvment they will come in very handy

[Weavious]

Nice!

[skywhirl]

This is turning out to be such an awesome set. The footers look really nice from the picture. Thank you so much for all your hard work.

[callmecosmo]

Looks great ShyGuy. But what about that notch on the top of each support, could it be gotten rid of to cut down on polys? Also the "fins" at the bottom of each post seems like this could be smoothed as well for poly reduction. I am no expert on this (being that I never made CS), but just my observations and ideas. This is just an idea, in the end this is your set and I am happy that you are willing to share it with all of us park builders.

Thank you for all your great sets! (We all need to say that more to CS builders.)

[supercoolsuper]

Oh wow. Didnt see that one coming. Although Im not really fond of the texture. But it all does work out.

[MeJayBe]

Based on ShyGuy's previous CS sets, I'm sure that he's very conscience about the poly counts. I think that the "notch" at the top of the supports works perfectly and don't lose the "fins" at the bottom... it makes the supports look more realistic.

I have a few questions though:

1.) Will there be a steep angled slope?
2.) Will there be any special supports for curves or helixes?
3.) Will you be making any additional pool path covers? (i.e. for the spiral staircase, ramps or mini steps)

There already is a "Pool Coverings" set out there but I'm liking yours a million times better!

[callmecosmo]

Belive me, I am in no way questioning the genious of ShyGuy, but simply asking a question. The more I look at the pic I do like the fins on the bottom, makes them more unique and realistic. I was more just posing a question about the "notch" on the top, but I am wondering now if this is so that the CS does not poke through the bottom of the slide.

[errt]

You can see it in the pic: The slide is above the notch.

[Toddthefox]

Finally Water Slide Supports :D

[rctman12]

YAY!! this is so cool!!!

[shyguy]

I have a few questions though:

1.) Will there be a steep angled slope?
2.) Will there be any special supports for curves or helixes?
3.) Will you be making any additional pool path covers? (i.e. for the spiral staircase, ramps or mini steps)

There already is a "Pool Coverings" set out there but I'm liking yours a million times better!
1) Yes, there will be fittings for steep slopes too.
2) No. Iceacts Curve Supports Set does the job perfectly.
3) No. I'm not making a pool cover set. I may make a couple other pool coverings, but certainly not a full set.



Belive me, I am in no way questioning the genious of ShyGuy, but simply asking a question. The more I look at the pic I do like the fins on the bottom, makes them more unique and realistic. I was more just posing a question about the "notch" on the top, but I am wondering now if this is so that the CS does not poke through the bottom of the slide.
The notch serves an important job. You are correct, the cs pokes through the slide without it. Even if the support doesn't touch the slide, it stills shows through as you pan back. There would be pretty big gaps between the slide and the supports without the notches.
Even still, at certain angles and distances, you can still see the tops of the supports fading in and out. Another odd RCT3 glitch.

[callmecosmo]

Thanks ShyGuy. Should of know in my original post that that the notch served a purpose. Good luck building, the set looks great.

[Old-Spice]

Looks Very Nice Shy-

[MeJayBe]

Thanks for the clarifications SG... looking forward to the release.

[Coaster Freak]

AWESOME

[adamb241]

thanks shy guy for telling me and good work on your project so far

[jaybuoy]

Do you have an estimated time of when your going to release it, because this is so cool.

[shyguy]

I thinking about releasing a beta version in a couple weeks or so. Then add more pieces to it over time.

[jmbekrub]

wow, shyguy, can't wait to see more of your wonderful creations!!!

[kylr23]

I thinking about releasing a beta version in a couple weeks or so. Then add more pieces to it over time.

willing to test it mr wounder;)

[michielh3]

a beta test .. WOW

i would really love to beta test :D

not that there is a big chance the you will choose me ..

[sr3d]

I think shy guy meant a public beta,very nice stuff shy guy :up: looking superb as usal.

[shyguy]

Yes. I will release the beta to everyone.

[kylr23]

Yes. I will release the beta to everyone.

good:up:

[shyguy]

Waterslide Support Set



With these pieces, you should be able to replace the in-game supports of almost any waterslide design. I will add more if you find some missing after I release the beta for testing.

http://img120.imageshack.us/img120/8053/wssupportskm6.jpg (http://imageshack.us)


.

[citytrader]

Absolutely beautiful!

[lego3366]

awesome. pure awesome. i hope for more of your awesome CS :D

[Old-Spice]

Great job on those supports

[supercoolsuper]

The supoorts are really good but waterslide supports dont really look like that. But its still really great and useful.

[shyguy]

The supoorts are really good but waterslide supports dont really look like that. But its still really great and useful.


Oh, really?


http://img170.imageshack.us/img170/9956/200706211625106ga1.jpg (http://imageshack.us)





And check out these supports...

http://img170.imageshack.us/img170/3527/waterslide3ga3.jpg (http://imageshack.us)
Not exactly your standard waterslide supports, either.






http://img227.imageshack.us/img227/7463/47789mruqwur6.jpg (http://imageshack.us)
Just thought I'd throw this in. Looks like fun. :bulb:

[PyroFREAK30001]

Haha. Very nice set shyguy.

[Maylene]

ha that last shot looks scary

[meme5053]

wow very scary indeed weeee 200 posts!!!!!:jumpclap::jump::hat::hat::turning::turning::eek-blue::love:atari!:mdr1::mdr2::nuts::punk::D:p:noob::eek2::eek2:200200200200200200200200200200200!!!!!!!!!!!!!!sorry

[michielh3]

I have one question about the waterslides supports , and a request:

Question : I noticed ther also is a horizontal beam , how are we going to connect it to the upper parts that connect to the slide,

Request : Could you make an angled beam ( only a 45 degree no other angles ) + a wall footer , so we can connect slide to walls.

Thanks a lot,
michielh3

[Simpleplantb]

Nice set Shyguy !!

[TycoonThing]

Nice Shyguy!!!!!!!!!!

[supercoolsuper]

Oh wow. Never seen those type of supports on a waterslide unless they are low ground supports and follow the terrain. Ok, you proved me wrong...again!

[shyguy]

Question : I noticed ther also is a horizontal beam , how are we going to connect it to the upper parts that connect to the slide,
It's meant to attach two vertical supports together for extra support.




Request : Could you make an angled beam ( only a 45 degree no other angles ) + a wall footer , so we can connect slide to walls.

A 45 degree beam should be no problem. I'm not exactly sure what you mean by a wall footer. Do you want me to just turn the footer 90 degrees and put an L-support beam that can attach to all the top connector pieces? Not sure how realistic that would be.

[michielh3]

A 45 degree beam should be no problem. I'm not exactly sure what you mean by a wall footer. Do you want me to just turn the footer 90 degrees and put an L-support beam that can attach to all the top connector pieces? Not sure how realistic that would be.

yeah , that is exactly what i mean :D

And , just one question , i your set competible with Jcatts steeloworx / mouseworx ???
because then we can build like this : http://www.msj.co.uk/images/projects/Swan3.jpg

You don't Need to make it , i know how much work it is to import / reimport , and then have someone to say it's wrong .. but if it is compatible withs steel worx , it would give us 1.000.000.000 more options :D

[shyguy]

And , just one question , i your set competible with Jcatts steeloworx / mouseworx ???


Nope. It's not compatible at all. None of his supports line up right with the waterslides. That's why I made my own set in the first place.




I needed the next set of pieces for my Water World park, so they'll be available too.

http://img170.imageshack.us/img170/6169/bridges1ak3.jpg (http://imageshack.us)
I don't have plans to make a complete set of pool covers. These will at least add a little variety to the paths. Sorry. There's not much I can do about the existing ramp rails.




http://img170.imageshack.us/img170/5263/bridges2sc8.jpg (http://imageshack.us)
These pieces are made to fit 2 ramps running parallel together to make it look like a bridge. You're still stuck with the original ramp supports, but it looks a lot better, nonetheless.

[{Freak}Rct3]

looks GREAT

[michielh3]

Looks Great !

I can't wait to see what will be your next CS idea :D

[pteri3]

I can only say it looks AMAZING. As do all of your sets :)

[kn717]

NICE. I love/need the stair covers. Looks great!

[MeJayBe]

Holy 'snap' SG... that's frikkin' amazing! I am sooo looking forward to this set dude... keep up the great work!

[shyguy]

michielh3 requested a 45 degree support and wall supports. I've made them both, but not sure how realistic the wall supports are. What do you guys think?




http://img247.imageshack.us/img247/9991/newsupportses3.jpg (http://imageshack.us)

[cjleonard]

I personally think they look pretty handy

[PyroFREAK30001]

It looks very nice. Great set shyguy.

[DarkMeasures]

Realistic enough. Especially if you have the diagnol piece and horizontal piece connected to the vertical piece.

[disneyfreak1]

I'm crazy bout this set...GREAT WORK SHYGUY :):):)...
-disneyfreak1

[adamb241]

wow that is very good i cant wait


good update!

[michielh3]

michielh3 requested a 45 degree support and wall supports. I've made them both, but not sure how realistic the wall supports are. What do you guys think?

Wow , these look even better then i could think , Thanks! http://static.rides.nl/img/smileys/worshippy_klan_midas.gifhttp://static.rides.nl/img/smileys/worshippy_klan_midas.gif

[NYRfan85]

I think they work great, because if you happen to have paths, other slides, or something right under the slide, they can still be supported nicely. Great work on the supports shy, I'll definitely be using those!:D

[Coaster Freak]

would it be pssoable to make a cover for the slide to make it dark?

[RollerMePlease]

I love it. :up:

[Disney]

Very nice set shyguy, these will come in handy in my parks.

[greenxday]

STUNNED* looks great and would be real usefull~

[Weavious]

These bridges may come in useful. :)

[ryguy222]

i think there realistic enough, Im pretty sure there used in Indoor water parks.

[lego3366]

fantastic! this set gets better 10 fold with each update!

[shyguy]

Well, I guess you like the wall supports. So I've tweeked them a little. I actually simplified them, but I think they look better.



http://img216.imageshack.us/img216/8855/wallsupportsty4.jpg (http://imageshack.us)
I removed the horizontal support coming up from the wall bracket, and now it attaches closer to the support top pieces.

[Albert Caine]

That looks really good!

[FuNkSty]

Ok, first of all.... its ICEATCS!!

Secondly.... This looks AWESOME man, i'm loving this new set and custom work!! Finally some attention is being made to the aqua park aspect of the game... I love the supports Shyguy, they look great and cutsie! One thing, like in the pic michielh3 posted, there's a thin 45 degree pole (or more realistically, steel cable) which connects the two end footers together to give it more rigidity since as we know some water slides out there DO tend to rock and sway slightly when in use.
Love the new path sets! It's such a shame about the vanilla path railing in game, we should have the option to turn them off like we can for queue lines. But you could maybe design a new fence that covers it up? like make the handrail 0.5 the height of the catfish set or make it double tiered... (if that makes sense)

Keep up the great work.

[Amplifyed]

MUST-HAVE SET!!! Nice work, this is something that I've needed for quite some time now...

[adamb241]

the slide looks very very good now good work

[michielh3]

Stupid me with al my question.. :p but i am haveing another one ..

Are the slide supports compatible with the bobsled coaster ??
Or haven't you tested that ..

[shyguy]

Stupid me with al my question.. :p but i am haveing another one ..

Are the slide supports compatible with the bobsled coaster ??
Or haven't you tested that ..
That will be your job when I release this. ;)

[MeJayBe]

I'm dyin' here. I've started my own water park and currently have about 6 slides with no supports. They all eagerly await your set ShyGuy. Don't let them down! :noob:

[jaybuoy]

Wall supports would be very handy for indoor water parks.

[| Aces |]

Woah, this is excellent ShyGuy! I love the slide supports and Pool Path Covers, very cool :D

[Nethero]

The supports for the wall atachable beams should look like a right triangle. It's more archetectual and realistic. Like this.

http://img395.imageshack.us/img395/808/waterslidevl7.png

Sorry if I am sounding snooty.

Just thought I'd add this in.
http://www.msj.co.uk/images/projects/Valais-2.gif

[MeJayBe]

Sorry Nethero, I'm going to have to disagree with you on that first pic. First of all, that slide looks way too rickety and I'm not sure if I'd even go on it. Secondly, that slide is just one big helix which Iceatcs' Custom Slide Supports have been made for. That second pic is a mess and not quite sure why you posted it other than to show how "other" supports look. Frankly, I love what ShyGuy is doing with his.

[michielh3]

The supports for the wall atachable beams should look like a right triangle. It's more archetectual and realistic. Like this.



Wel , there already is a sets which has that pieces ( Icecats slide supports ) , that's why shuyguy is now making one with bigger pieces ;)

[--Griffon--]

Wow. These supports will be realy useful! Great job shyguy!

[jessknight1]

Something I think would be cool would be a circular cut out in a wall that fits the body slide in it. Might come in handy, but who knows.


This whole set looks awesome shy, it will probably come in handy for even more then just pools!:up:

[ToadMaster356]

Something I think would be cool would be a circular cut out in a wall that fits the body slide in it. Might come in handy, but who knows.


Yeah, something like a wall filler.

Anyway, is the netting from Leap of Faith in Water World part of this CSO set or someone else's?

[Jonnyears]

I have a feeling that the netting was made by Rctmaniac. And the wood bits on the edges were from DasMatze's set

[kylr23]

jonny your right:up: ill be looking out when the betta is out i got some idears coming but i need to wait till the water park gig dies down;)

[Nethero]

Wel , there already is a sets which has that pieces ( Icecats slide supports ) , that's why shuyguy is now making one with bigger pieces ;)

I wasn't saying it had too look exactly like the picture, I meant it had to have a triangular beam.

http://img211.imageshack.us/img211/7962/supportsdt8.png

It looks more correct when attached to a wall.

As for the big mess I just thought I'd post it. No real reason.

[armstrong8991]

I agree nethero...it would look more realistic...i love the look of your supports though shyguy!

[michielh3]

I wasn't saying it had too look exactly like the picture, I meant it had to have a triangular beam.

[x]

It looks more correct when attached to a wall.

As for the big mess I just thought I'd post it. No real reason.

But that's icecats slide supports .. why would shuyguy also make those pieces if they are already build ??

[rctmaniac]

I have a feeling that the netting was made by Rctmaniac. And the wood bits on the edges were from DasMatze's set

You mean-some of my stuff is in shyguy's park? *faints* :p
This set is looking really nice-I am already planning lots of ideas for my park :)

[Six Flags]

This set is another master peice from you shy!! A-mazing!! I can't wait to Download this one :cool:

[~LoveTulie]

That looks great, Shyguy! Looks very useful.

When you make CS, it is as easy as screwing a lightbulb for you?

[Ryani210693]

haha!^^^^ I love that comment!

Will you be posting pictures of the new rooves you have used in water world, or will they come as a seperate set, or aren't they even CS at all...Which will make me and many other people seem silly!

Ry.

[shyguy]

Will you be posting pictures of the new rooves you have used in water world, or will they come as a seperate set, or aren't they even CS at all...Which will make me and many other people seem silly!

Ry.


Yes, the rooves will be part of this set. (It's getting pretty huge!)

But first, some new colorable stair covers and flowery floors.

http://img245.imageshack.us/img245/6876/colorsdt8.jpg (http://imageshack.us)

[supercoolsuper]

Cool! You may need to make some shutters for it also. It goes with it nicley.

[PyroFREAK30001]

Great set Shyguy.

[~LoveTulie]

Those look really good. This is going to be really useful. IMO, there is going to be alot more Waterparks after this set is released.

[Crispylad]

This is awsome!I love your work!

[michielh3]

Yes, the rooves will be part of this set. (It's getting pretty huge!)


you could split it up into :
pool parts ( slide supports, bridge covers etc. )
non pool parts ( the stairs , floors , rooves etc. )

but that's all up to you ;)

btw , i really like those stairs :D

[shyguy]

Here's the last group of pieces to be included in the Water World Set 1.



http://img74.imageshack.us/img74/4826/beachsetcn4.jpg (http://imageshack.us)


Expect a beta release very soon. This will NOT be the finished set, but it will give you a chance to try it out and give me any feedback, suggestions, etc.

The full release will include more pieces to round out the set such as more windows, shutters, and roof pieces, and more supports and path covers if needed.

[Dark_side300]

Those roofs look brilliant!

[Guitarboy315]

THANK YOU SOOOO MUCH FOR MAKING THOSE ROOF PIECES! I've been wanting them in rct3 for so long and since i can't make custom scenery i am sooo happy you made them! Thank you sooo much shyguy and i LOVE all your work!

[LightGrenades]

I have been waiting for roofs like these for a long time, to the point where I was about to make some myself. Thank you for doing this.

[universalparks]

Expect a beta release very soon.
Downloading. ;)

[Janitor 06]

Hey... now I look at that picture more closely... I see a pool in the background!
And I'm in love with that spire!
And are the top of the roofs textures, or are those lines 3D?

[supercoolsuper]

Beautiful! I love the feel of it. Its as colorful as the islands themselves.

[shyguy]

Hey... now I look at that picture more closely... I see a pool in the background!
And I'm in love with that spire!
And are the top of the roofs textures, or are those lines 3D?
They're 3D ribs...which makes these rooves a little polygon heavy. Especially the Spire. So use sparinigly if you have a low-end computer.





Water World Set 1 beta released!


The beta version of Water World Set 1 is now available. It's not complete and there will be more pieces added. But I'm releasing it now so you can try it out and let me know if you have any suggetions on pieces that should be included.



http://img180.imageshack.us/img180/3498/beachhouseku2.jpg (http://imageshack.us)



Download at my site

Shyguy's World (http://shyguysworld.com/)

[Weavious]

Awesome! I'm going to try this out right now. :)

[PyroFREAK30001]

Great! Can't wait to use it. Thank you for the great set Shyguy.

[DrctBoy]

Thanks for the beta downloaded shyguy! Can't wait to get the whole set!

[infiniteblue]

Seriously my favorite set from you, Shyguy! It's just so awesome.

[| Aces |]

Cool! :)

[DasMatze]

This is really shyguy (shyguy is now an adjective and means something like awesome)! :D Even if I'm too stupid to build with some of your pieces. :noob: I dont have enough experience yet.

Kutgw! (Keep up the great work) :up:

DasMatze

@{Freak}Rct3: Who said, that Im playing again? I dont.

[{Freak}Rct3]

Hmm dasmatze... are you playing rct3 again... ah i know its an adiction :P

let's all go in therapy!

great work shyguy

[Dark_side300]

downloaded!!! w00t!

[Nethero]

But that's icecats slide supports .. why would shuyguy also make those pieces if they are already build ??

well then you might as well just use Icecat's set for the wall supports, but I don't think they form to walls that well at all.

[~LoveTulie]

This set it wonderful! I love the floor paths, and the rooves are going to be VERY handy. Thanks Shyguy!

[LightGrenades]

The only thing that I don't like is the fact that the roofs are "3D ribs" instead of textures, but I guess I'll have to deal with it.

Thanks for the release Shy, We appreciate what you have done for this game.

[Magnum]

I've been gone for a couple of months... And it is so nice to come back and find a new Shyguy project/set... Love your Water World!...

As always... I expect brilliance... And I believe this is another example of it... :)

[michielh3]

verry nice beta shuyguy :D :D

but i found some small things :

vertical slide supports ??

http://img341.imageshack.us/img341/7899/shot0391iq2.jpg

Path covers ??

http://img381.imageshack.us/img381/7311/shot0390kq1.jpg

I know you aren't going to make a full path cover set , but at least make us be able to put corners in it ..

[{Freak}Rct3]

WOW shyguy sry to say but he has a point!!

[michielh3]

WOW shyguy sry to say but he has a point!!

that would still make it 1 -1.000.000.000 ( me - shuyguy )

:p

[MeJayBe]

I agree, it would be nice. But, I think people can work around it for now. This set is simply amazing and most certainly will be used in my new park.

[madshell]

Beautiful set as always. I love the roofs. I just hope my computer memory will like them too. :)

[LuckyGirl]

Shyguy, that Carribean house is gorgeous!
This set is creative and versatile as usual ;)

[VentureLg-Kantu]

Great set, and great park ^^ I'll be sure to use some of this in the future

[shyguy]

verry nice beta shuyguy :D :D

but i found some small things :

vertical slide supports ??

http://img341.imageshack.us/img341/7899/shot0391iq2.jpg

Path covers ??

http://img381.imageshack.us/img381/7311/shot0390kq1.jpg

I know you aren't going to make a full path cover set , but at least make us be able to put corners in it ..

Yes. I know those pieces still need to be made. But in the second picture, there IS a piece for the T-intersection. It's the Pool Cover - Ramp / extension. (I think) Let me know if it works. The other pieces will come later.

[michielh3]

But in the second picture, there IS a piece for the T-intersection. It's the Pool Cover - Ramp / extension. (I think) Let me know if it works.

found it , my bad :)


edit - Wait , those where the normal pool extensions , not the ramp extensions ..

So there is one for the pool tiles ( full ones )
but there isn't on for the ramps ...

[Weavious]

What a great set! I love the possibilities the roofs provide. I have noticed, since this is a beta release, there are many wall pieces that are not in this or any previous set. Possibly, in a later release? :up:

[shyguy]

What a great set! I love the possibilities the roofs provide. I have noticed, since this is a beta release, there are many wall pieces that are not in this or any previous set. Possibly, in a later release? :up:
The Main Street Set 2 Clapboard walls are what I'm using with these roofs. You'll find the 3H inclined walls in that set as well. The 2H will be in the final set.

[cjleonard]

Shyguy - firstly, congrats on another great set. Just one thing though - I was wondering if the door frame on the left hand side (tower) and the cut-thru walls at the top of the doorways are in the second set or something else all together?

[RCT-Spanky]

What a great set! I love the possibilities the roofs provide. I have noticed, since this is a beta release, there are many wall pieces that are not in this or any previous set. Possibly, in a later release? :up:

To my knowledge the walls are made by Pyro- or Coasterfreak (We have really a lot of "freaks" here :p). Check the Water World Trhread (since the announcement of "Atlantia Beach Landing"). Shyguy mentioned it in this thread.

Thank you Shyguy for the release!!

[shyguy]

Shyguy - firstly, congrats on another great set. Just one thing though - I was wondering if the door frame on the left hand side (tower) and the cut-thru walls at the top of the doorways are in the second set or something else all together?

I used pieces from several sets to create the Beach House. Most, like the door frames on the tower, are from Main Street Set 2. Coasterfreak's House Specials provide the framework pieces above the doorways. Das Matze Industry Set provides the sheetmetal inside the framework pieces.

[cjleonard]

Cool cool :) Thanks muchly

[Maverick2007]

Maybe I missed it, but is there a peak for the roofs? It would be really helpful. Also, on the roofs, a LOD that takes away the 3D ribs would make them look much better for people who can't use anti-aliasing. It looks like this (http://aycu10.webshots.com/image/26129/2004406325765002048_rs.jpg) from far away.

[shyguy]

Weathered railings, path, and bridge covers.

All the wooden path covers in the beta set all look very new (and dark). So here are some colorable, lighter, more weathered looking covers. The Railings are an exact duplicate of the Catfish Cove ones, except with the new, lighter color.





How to cover the Dirt Track elevated paths with the new, weathered pieces...


http://img460.imageshack.us/img460/5561/weatheredbh9.jpg (http://imageshack.us)

[Dan Mc]

hi

first of, thats cool!! second thing, i have seen some CS makers have had to make a sheat of pictures of the objects with what they are writen next to it. if you have made something like that for your sets could you relese them so i could build with your sets better?

Thanks

Dan

[Ice101]

Great job I love the new pieces

[Weavious]

I love this set. I wonder how much will be in this set when completed.

[Nethero]

It sure blends in with the path piece nicely, but You've been dealing with the path pieces a little too much. I want to see something different. Also I'm not downloading until you confirm that the set is complete.

[Dark_side300]

Shy guy, this set is helping me so much. you are an RCT3 god!

[Minosha]

ShyGuy u are amazing man :)
U almost can make everything u want u look like a RCT3 WIzard :P

[tnstickboy70]

Wow,
How did I miss this? I guess Iv'e been bussy lately. The is absolutely stunning.

I just got it and Can't wait to use it. :)

[shyguy]

Here's some new pieces that will be included in the final version.




http://img88.imageshack.us/img88/1716/newstuffgu2.jpg (http://imageshack.us)

[Weavious]

I'm looking forward to using 1H, 2H, 3H, 4H Inclined Clapboard Walls.

[Dan Mc]

shyguy, did you read my post??

[PyroFREAK30001]

Love the new items Shyguy.

[~LoveTulie]

Looks great! I LOVE the shutters!

Although I think I've seen that same window in one of your sets before...

[| Aces |]

Looks great! :D

[NYRfan85]

Thanks for adding the angled clapboard walls! I have always felt that those pieces were missing from your Main Street sets, because I like using those clapboard walls, but could never make every kind of wall/roof system with them, but now I can!:up:

[shyguy]

shyguy, did you read my post??
Oh, sorry for not responding. No. I don't have anything like that.

[Dan Mc]

ok, not to worry.

Dan

[Crispylad]

That looks great!I can't wait to download the beta when my comps fixed!

[michielh3]

looks nice , great job !

[Janitor 06]

Shyguy, do you always have the shadows turned off?

[shyguy]

Shyguy, do you always have the shadows turned off?
Lately I've been keeping them off. There are many reasons for this. First off, shadows don't work on custom paths. They also don't work on the in-game pool tiles. But the main reason I'm leaving them off now, is I'm sinking plants below the surface of the beach so it just looks like a little grass is growing here and there. But with shadows on, you see big, round shadows at each spot, making it look terrible. So I'm keeping the shadows off for this park.

[~LoveTulie]

I just thought of a quick suggestion. I know that you have the catfish code set, but maybe you could always make some fence covers for the ugly ones that come on the in-game pool tiles. Is that possible?

I'm not requesting or anything, but I thought it could be helpful for you and I just want to know if its even possible (I'm guessing that it is, but who knows)

[shyguy]

It's possible, but it would be a big project, one I don't have any interest in doing. If they really bothered me, I might tackle it. But they don't.

[Weavious]

How about recolorable wodden path covers similiar to the stair covers? (if I didn't notice them yet)

[shyguy]

Yes. There are recolorable wooden path covers and gentle slope covers to match the recolorable stairs. (see post 210)

[Weavious]

Thanks. :)

[Janitor 06]

Do you use DasMatze's Measuring block to make pieces fit exactly ver the in-game ones?
If you don't, it's very handy. It's in his Utility's pack.

[{Freak}Rct3]

Yeah what janitor sayd.

the new pieces look great shyguy
-{Freak}

[shyguy]

Do you use DasMatze's Measuring block to make pieces fit exactly ver the in-game ones?
If you don't, it's very handy. It's in his Utility's pack.
Never used it. I didn't know what it was for. I'll check it out.

[Nethero]

The clapboard walls are something I've been wanting. Thanks.

[michielh3]

verry nice, this is great for building beach styled buildings :D

but how are you doing with the pool section pieces ??
anything new on that ??

[shyguy]

but how are you doing with the pool section pieces ??
anything new on that ??
Is it the rounded ramp corners that you want?

[Dan Mc]

yes!!

[Laszlo41]

This is the first time I've seen this thread. Don't know how I missed it before. All I can say is: "Wow, very nice work. I'm most impressed." It is a pity that covering all pool paths would be an extremely daunting and difficult task because I have been to many pools that use wood decking for raised walk spaces. Would (wood?) be nice to have that option. I really enjoy your work, thanks for making it available. (I don't need any CS, cause my life doesn't revolve around it, but it is nice to have options.)

[michielh3]

Is it the rounded ramp corners that you want?

I would really like them , yeah !

But you don't need to rush pieces because some like me requests them , i was just wondering how the pool parts where going , or if anything new was done.

No presure there :p

[shyguy]

How's this...


http://img167.imageshack.us/img167/1338/roundcornergf2.jpg (http://imageshack.us)
This will probably be the last of the pool covers.

[Dan Mc]

wow! thanx shyguy! thats grate!!

[kylr23]

i got a little request how aboult upword curved peices. theres one prob with the supports they show through the slide pending on it.(curved steep to 25 digrea angle thing.) i did find manny uses for the slide hey they suport that bowl slide good:D.

keep it up or else:mad:;)

[shyguy]

The next thing I'm going to do is add any slide supports that are missing. To fully understand which support is needed, posting a detailed photo with the name of the slide pieces (small curve, gentle slope, something like that) written on the photo will help.

Keep in mind that several of the supports I made can be used in more than one place. Not just the piece that I labelled them for.

[kylr23]

ok i see now like you can use them as stair supports stuff like that? any ways ill be waiting till a new update

[shyguy]

No. I mean one might be labeled Steep Slope Crest, but maybe it will work on a Gentle Slope Bottom. Something like that...