how to use pitch black wall when building a haunted house

[gamer2456]

how do use the pitch black wall when building a hunted house .

do i put outter wall , than pitch black wall and the inner wall .
or

can build just outer wall and have pitch black the wall and ceil .

if don't understand this please tell how ever one esle use to bouid haunted house or castle


and closet whole thing in and build with normal wall inside the close in build and still have it black

[Chicken Biscuit]

...What?

[gamer2456]

some one please help me

[Amplifyed]

Yeah, I would put the black wall on the inside and the other wall on the outside. If the two walls intersect, it looks all spastic.

[ryguy222]

This is your call, either way is fine, but if you have this ride in a park and you want it to look decent, do an inner black wall and an outer decorative wall. The BEST way to do it is to have to innner black walls a square apart, and then the outer decorative wall. The reason is if you are deleteing stuff within the walls you might accidently delete a wall pannel and not even realize it. IF you did that with the decorative wall as the outer wall then you'd seen it from the ride, at a certain angle and go in a never find the hole. Its very frustrating, however if you put in a second wall this won't happen. So this is how you could do it
Inner wall
1 2 3
|_| |

Ok 1 is the inner Black wall
2 is the second black wall and inbetween the black walls is a black roof. Thats optional, but if you don't do that you'll see the grass and the whole setup would be useless. This takes more time but trust me its worth it.
and 3 is the outer decorative wall.
My suggestion to you is to make this layer a few squares long, and then save it as a custom structure and just keep putting it down.
Now for roofing
Roofing is the most difficult feat in building a Show building for a dark ride. The best way to do it is make a huge roof section on the ground, save it as a custom structure, then hoist it up to the top of your building. This sounds pretty easy but its not, so i suggest just one layer of roofing, so what if its black nothing wrong with that.

[gamer2456]

how do get so the pitch black wall don't show on my normal walls

[ryguy222]

*Sigh*
I was hoping you'd understand that when i said Put the walls a square apart from each other you'd put them a square apart from each other.

DO NOT PUT THEM IN THE SAME EXACT SPOT, then they will show, you need to put them apart.